Annual Cow Pasture Equipment Auction

Annaul Cow Pasture Equipment Auction

  External Links
Annual Cow Pasture Equipment Auction

Annual Warren County Cow Pasture Equipment Auction

Saturday 6th   May 2023 @ 9:00 A.M.

WARRENTON, NC  (Inez Community)


 DIRECTIONS: From Warrenton, NC take Hwy 58 south 9 miles, sale on right. From Nashville, NC take Hwy 58 north 26 miles & watch for signs. If you are traveling Hwy 43 @ Grove Hill community watch for auction arrow pointing west. Coming from I-85 in Henderson, take Hwy 39 south thru Henderson, just past Bojangles @ fairgrounds turn left on Vicksboro Rd., go 12 miles to Hwy. 401, straight across on Lickskillet Rd. for approx. 12 miles to Pete Harris Rd., straight across, sale site 1 mile on right. Watch for signs along the way.

SALE SITE ADDRESS: 2254 Hwy. 58 - Warrenton, NC 27589



John Deere 7810 MFWD, SN-H010933, powered by 175 hp, 6-cyl. diesel, power quad transmission, 540 & 1000 shift-on-the-go pto, (3) sets dual remote hydraulic outlets, 14.9R30 front tires, 18.4R42 rear tires, 8375 hrs., sells w/warranty.

John Deere 2955, SN-T733309, powered by 97 hp, 6-cyl. diesel, standard transmission w/creeper, differential lock, ps, 540 & 1000 shift-on-the go pto, (2) sets dual remote hydraulic outlets, 4-post roll guard w/canopy, 10:00-16 front tires, 16.9-38 rear tires, 7189 hrs., one owner – bought new to Warren County by Charles Lynch

John Deere 2240, SN-290939L, powered by 67 hp, 4-cyl. diesel, standard transmission, differential lock, 540 shift-on-the-go pto, set dual remote hydraulic outlets, 7.59-16 front tires, 13.6-38 rear tires, ?371?hrs. showing, one owner, shed kept.

John Deere 4050, 6-cyl diesel.

John Deere 40-S. SN-71100, one owner, all original, shed kept, not running @ press time.

New Holland TN55, 4x4, 3-cyl. diesel, standard transmission, differential lock, ps, 540 pto, remote hydraulic outlet, 2-post roll guard, 9.5-20 front tires, 13.6-28 rear tires, 1807 hrs., one owner - @ press time forward/reverse lever was stuck.

Massey Ferguson 175, diesel, ps, standard transmission, 2-post roll guard w/canopy, sold new in Henderson, NC.

Farmall M, gas, original.

Farmall Cub, motor needs attention, been disassembled, shed kept.

IH 412, 11 yd. hyd. paddle pan, 6-cyl diesel, power shift transmission, 23.5-25 tires, SN-5420003U015609, runs & operates good.



2018 Chevrolet Tahoe Premier, 4x4 , loaded, 90K miles, one owner – Anne’s, very nice.

2006 KW W900L, day cab road tractor, Cat C-15 Acert, 475 hp, 10-speed, air brakes, west coast mirrors, 24.5 aluminum Budds, 150 gal. fuel tank, 225” wheel base, dual stacks, dual breathers, 2-line wet line, aluminum headache rack, blocked 5th wheel, 3.70 40K rears,  (8) bag air ride suspension, been converted to single turbo, 555K miles.

1998 KW T800, N14 Cummins, 10-speed, single wet line, 24.5 aluminum Budds, 845K miles

1994 Chevrolet Kodiak, V8 gas, 5-speed w/2-speed rear axle, ps, 11R22.5 Budds, 16’ twin cylinder dump w/roll over canvass, 54,675 miles, very nice truck.

2004 IH 7400, 4x4, diesel, automatic, w/Speedy Spread spreader body.

2002 Ford F150 XL, extended cab, 4.6L gas, automatic, below eyeline mirrors, 16” tires, approx. 215K miles, unreadable mileage.

2005 Ford F250, 4x4, 8-cyl. gas, automatic, 17” tires, BILL OF SALE ONLY

2006 Chevrolet 150, 4x4, extended cab, 8-cyl gas, automatic, 17” tire, 6 ½’ aluminum flatbed, BILL OF SALE ONLY. 

2021 EBY 24’ X 6’8” aluminum gooseneck stock trailer, tandem axle, 16” tires, electric/hydraulic brakes, floating center divider gate w/full swing & ½ slider, full swing out rear w/ ½ slider, right escape door, 2 5/16 ball, Kemlite lined roof, like new.

2005 Feratherlite STL, 30’ x 8 ½’ gooseneck flatbed,  25’ flat w/5’ dovetail, tandem axle, 16” tires,  10K electric winch, dual landing gear, side mount tool box, 2 5/16 ball.

1987 Montana 36’ frame aluminum dump trailer, 24.5 Spokes, good tarp.

1997 Freuhauf 45’ x 96” semi-flatbed, sliding tandem, 24.5 tires, 4’ steel headboard, Moffit hook up on rear, 14 sliding winches on driver side.

2004 Adams 14’ x 7’ stock trailer, tandem axle, full swing out rear w/left hand ½ slider, center divider w/escape door, ball hitch (this trailer could use a new strip around nose area).



John Deere Mdl. 425,  20-blade offset disc, 11” spacing, pull-type, bought new to Warren County w/JD 4000.

John Deere 215, 14’, 36-blade disc, tandem wheel, cone blades, 9” spacing, pull -type, good.

Blanton 8’, 24-blade disc, 9” spacing, 3-pt.

Zone Builder Mdl. 132,  2-shank, w/press wheels, 3-pt., -U-can call new.

Ford 3-bottom plow.

IH 3-bottom plow.

2-bottom plow, 3-pt.

2-row Danish tine cultivator.

Field cultivator, 3-pt.

John Deere closing wheels, 23-rows, 46 wheel, last on JD 1795.

John Deere 8200, 8’ grain drill, single disc, w/small seed attachment pull type.

John Deere 7000, 6-row no-till planter, trail-type.

Hay Buster 107, approx. 8’ no-till drill, front dolly, small seed attachment.

IH 510 8’ drill, trail-type.

Cole 4-row no-till planter w/edge drop hoppers w/spring reset shanks, 3-pt.



John Deere 566 round baler, net wrap & twine, 540 pto, auto chain oiler, bale push bar, 7127 bales, good, never been wet.

John Deere 275-disc mower, 9’ cut, 540 pto, 3-pt.

New Holland #472, 7’ mower conditioner.

Befco 9’ disc mower, 3-pt.

Frontier WR1010, 10-wheel hay rake, hydraulic fold, pull type.

Krone 5.50 4-basket hay tedder, hydraulic fold, 540 pto, pull type.

KMC 4755 disc mower caddy cart.

8-wheel V hay rake, pull type.

Farm King tedder rake, 540 pto, excellent condition.

New Holland 311 square baler, 540 pto, twin tie, shed kept.

John Deere 700 feed mill, hydraulic driven, mill loading auger, w/square bale elevator, very nice, never been wet.

Patriot 150 bu. double sided creep feeder, good, paint faded.

Wilson 150 bu. double sided creep feeder, w/creep panels, heavy duty landing gear.

150 bu. gravity flow box.

ForMost Mdl. 450 portable cattle working chute w/automatic headgate, palpation cage, scissor type back gate, very good condition.

Priefert cattle squeeze chute w/manual head gate, like new.

C & B cattle squeeze chute w/automatic head gate, like new.

Priefert manual headgate.

Automatic headgate.

(2) 4-hole automatic cattle waterers.

8’ metal livestock rack for pickup, double swing out rear gates.

Metal T post, 100.

Metal electric fence post.

Barb wire.

Hi-tensile wire.

Treated fence post



Granville live bottom box, mounts on harvester, looks good.

Sheppard 29’ incline conveyor, used to feed baler, 30” chain.

Sheppard hydraulic driven conveyor w/flipper, used on green leaf.

Ford 6-cyl gas w/Gardner Dever irrigation pump.

V8 Chevrolet w/Berkley pump, on trailer.

Wisconsin 4-cyl. gas w/Berkley pump, trailer-type.

Rainbird big guns on wheels.

Rainbird 90 & 40B sprinklers.

Wade Rain 4” irrigation fittings.




2000 Honda Rancher ES, 4x4, 4-wheeler, electric winch, gun rack, 3950 miles, excellent condition.

Aerway 10’ aerator w/concrete weights, dual wheels, pull type, good teeth.

Powell 12’ aerator.

John Deere 145 front end loader w/5’ bucket w/independent hyd. controls, last on JD 2240.

John Deere HX10 rotary cutter, 10’, chain guards, 540 pto, stum jumpers, sold rubber tires, pull type.

Phenix ditch bank mower, used 75 hrs. 540 pto, 3-pt., like new.

Woods 6’ rotary cutter, 540 pto, 3-pt., deck could use some work.

John Deere 5’ rotary cutter,

Hardee ditch bank cutter, 3-pt.

Hardee tiger Cut 4’ rotary cutter, 540 pto, 3-pt.

Approx. 4 yd. hydraulic pan w/dolly.

Southern 6’ box blade, 3-pt.

8’ box blade, 3-pt.

Reddick 300 gal. front mount tank, last on JD 8235R w/mounting bracket.

Reddick 200 gal. front mount tank, last on JD 7510 w/mounting bracket.

750 gal. poly nurse tank.

500 gal. poly tank w/pump & motor & reel.

500 gal. poly tank w/pump.

1550 gal. flat bottom poly tank.

55 gal. poly tank.

50 gal. poly tank.

26 gal. flat bottom poly tank.

(2) Reddick front mount tank brackets, (1) last on JD 7810, (1) last on JD 6170R.

Quonset hut  building w/bolts, new, never been assemblied, will try to find diagrams.

Winco 15KW pto generator, 540 pto, mounted on single axle carrier w/folding metal cover, pin hitch, works.

Lincoln AC 225 welder generator powered by B & S 16 hp engine, mounted on single axle carrier w/torch outfit & vice, 2” ball hitch (not run in several years, shed kept).

1000 gal. fuel tank w/battery operated pump.

Shop made wood heater.

Boom pole, 3-pt.

IH Mdl. 141 4-wheel wagon running gear, could be a collector’s or used.

Concrete steps.

John Deere 10-bolt hubs, last on JD 7810.

John Deere 9-bolt hubs, last on JD 4250.

18.4R42 duals, 10-bolt, last on JD 7810.

48-31.00-20 flotation tires.

15R22.5 tire & rim – Dayton style.

15R22.5 tire & rim- Dayton style, w/spacers.

14.5 tire & rims.

(2) 4’x7’x14’ tool bars, 3-pt.

(2) 520/85R38 tire & wheel, 90% tread.

13.6-16 turf tires, on 6-hole rim.

25-.8.50 turf tire, on 6-hole rim.

212-80D15 turf tire, on 6-hole rim.

John Deere rear rims for 4255.

39-20” scalloped disc blades, like new.

(3) 18’ x 8”  steel I beams.

14’ x 8”steel  I beam.

11’ x 8” steel I beam.

5th wheel jack for moving semi trailers.

Blue lay flat hose, various sizes.

Bottom rollers for Cat D8 & D6 bulldozer, new.

Mobile home axles.

Oliver iron wheel grain drill.

Portable concrete mixer, powered by Briggs & Stratton 8 hp engine.

Several sets JD front fenders, fit 7 & 8000 series tractors.

Phantom flying drone w/all controls, (may need new battery).



1x6x14 & 1x8x14 rough cut, mostly pine.

6x12x8 reclaimed wooden beams.

Inventory of Pine, cedar, walnut, oak lumber

Cedar porch swing, swing w/legs, glider, picnic tables, benches, some walnut furniture made from timber harvested in Warren County.



Auctioneer’s Note:  This is just a small sample of what will be @ this sale. Check website for updates. Remember - If you are interested in a particular item, always call & make sure it did arrive at sale site!! Some items may not make it to sale site.  Carefully read the note below regarding when equipment will be received at sale site.  Call office for commission rates before bringing equipment – this could save you time & make you $$$$. Check web often week of sale for updated equipment & photos.

Read Carefully!!!  Equipment will be received @ sale site week of sale Monday, 1st May  - Wednesday 3rd May 9:00 AM – 5:00 PM & Thursday, 4th May  9:00 AM – 12:00 NOON. Bring extra set of keys for vehicles. Items taken on these days only!! Friday will be for getting items in sale order & Saturday will be for selling only!!   Kids need to be under adult supervision at all times.

Selling Schedule:  Note the early start - 9:00 AM.  As usual bring a buddy as 2 sales will be running simultaneously – one from each side of the truck.  This year we will have an implement row to be sold at the same time tractor row sells.  We are planning to have 2 sales from start to finish & maybe 3 sales part of the time. 


Bring trucks & trailers – we will have (6) loaders & operators working sale day.  We will be glad to assist you on sale day getting loaded.


Terms & Conditions:  All purchases must be paid for sale day. All property sells as is where is with all faults, with absolutely no warranties implied or expressed in any way.  All Serial Numbers, mileage & hrs. unverified. All info printed in brochure is believed to be correct but not guaranteed.  The auction company reserves the right to offer property in separate sales, combinations thereof or as a whole.


Sales Tax Info – We are now required to charge NC Sale Tax at our sales.   If you we do not have a completed sales tax exempt on file, you will be charged NC Sales Tax.


  Bid online @ or onsite in person.  All items will not be on internet.  Internet bidding starts @ approx. 11:00 am – check website for update.

Terms & Conditions
Internet Fees: 3% with $750.00 max per item. Minimum fee of $25.00 per item.

Methods of Payment Accepted: Checks with prior approval, cash or wire transfer. Wire transfer must be received by the auction company within 48 hours of the auction & will be an extra fee of $25.00. Credit Cards are NOT accepted and only used as a verification tool. Please contact the auction company for wire transfer instructions. Sales tax will be collected unless we have on file a completed sales tax exempt form E595E on file.

Currency Type: USD
Shipping Instructions: Buyer is responsible for all shipping logistics and costs.

Preview Date & Times: Thursday and Friday 8:00 am to 5:00 pm
Checkout Date & Times: Purchases must be removed from auction site within 3 days of sale unless prior arrangements are made.

Special Terms
All property sells as is where is with all faults, with absolutely no warranties implied or expressed in any way. All Serial Numbers, models, size, mileage & hrs. unverified and ALL SALES ARE FINAL. Property is open to thorough public inspection. It is the Bidder’s responsibility to determine condition, age, genuineness, value or any other determinative factor. E.B.Harris Inc./Auctioneers may attempt to describe the merchandise in advertising, on the Internet and at the auction but makes no representations. In no event shall E.B. Harris Inc./Auctioneers Inc be held responsible for having made or implied any warranty of merchantability or fitness for a particular purpose. Bidder shall be the sole judge of value.
Bidders who bid from off site and are not present at the live auction or preview understand and acknowledge that they may not be able to inspect an item as well as if they examined it in person. It is the Bidder’s responsibility to determine condition, age, genuineness, value or any other determinative factor.
E.B. Harris Inc./Auctioneers will not be responsible for any errors or omissions in the description of the merchandise unless it is a material and intentional misrepresentation of the item itself. Bidder agrees that everything is sold as is and that they may not return any item they purchase.

E.B. Harris Inc/Auctioneers is providing Internet pre-auction and live bidding as a service to Bidder. Bidder acknowledges and understands that this service may or may not function correctly the day of the auction. Under no circumstances shall Bidder have any kind of claim against E.B. Harris Inc/ Auctioneers or anyone else if the Internet service fails to work correctly before or during the live auction. E.B. Harris Inc./Auctioneers will not be responsible for any missed bids from any source. Internet bidders who desire to make certain their bid is acknowledged should use the pre-bidding feature and leave their maximum bid before the auction begins. E.B. Harris Inc./Auctioneers reserves the right to withdraw or re-catalog items in this auction.

You will receive a phone call or text message from a representative with E.B. Harris Inc./Auctioneers that you are the successful bidder & you can come pick up your item. Wait for this phone call before coming to pickup your item.
The auction company reserves the right to offer property in separate sales, combinations thereof or as a whole.

Announcements made sale day take precedence over printed matter.
Please read all Terms and Conditions before bidding. By Bidding, you are agreeing to these Terms and Conditions .