Swinson Family Farms LLC & Others

Farm Equipment

  External Links
Farm Equipment Auction

FARM EQUIPMENT AUCTION
SWINSON FAMILY FARMS LLC & OTHERS
SATURDAY 10TH APRIL – 2021 - 10:30 AM
Mt. OLIVE, NC

Directions: Being on Hwy. 403, 5 miles north of Faison & 5 miles south of Hwy. 55, turn on Beautancus Rd. travel 2 miles, sale on left.

SALE SITE ADDRESS: 1632 Beautancus Rd. – Mt. Olive, NC

BULK BARNS, TOBACCO EQUIPMENT, HI-CYCLES.
(12) Long all steel, 10-box barns, 3-phase, LP gas.
(10) Long all steel, 10-box, single phase, LP gas, (1 is Blue tag – Long Argri-business)
(8) Long all steel 8-box barns, LP gas, single phase, (5) w/Long heat exchangers, (2) Bill Grady Warsaw Welding heat exchangers, (1) BulkTobaco heat exchangers.
(21) Long (blue trim) 8-box barns, LP gas single phase
(2) Long (red trim), 8-box barns, LP gas, single phase.
(2) Speedling 36 x 250 green house.
1984 Trinity 15,000 gal. LP gas tank – located @ a569 Norwood Ezzell Rd. Mt. Olive, NC)
(4) DeCloet 2-row harvesters w/defoliator head & dump box, SN-03034, 97435, 96232 w/JD 4-cyl diesel, ’92 model w/Perkins 4-cyl. diesel.
Granville 2-row stripper w/dump box, JD 4-cyl. diesel, 901.5 hrs.
(2) Powell 1-row strippers, pull type.
Granville live bottom box, 3-pt.
(2) Sheppard 24’ x 5’ drag belt trailers, tandem axle, pin hitch.
(2) Sheppard hi-lift stripper trailers, single axle, pin hitch.
(4) 16’ shop made, single axle, drag belt trailer, w/roll over tarp, pin hitch, (2) w/chains, (2) w/belts.
(3) Sheppard hydraulic power pac
Taylor 22’ x 9 ½’ transition conveyor.
Taylor leaf loader.
(3) Granville tobacco balers w/scales, set up to run off of tractor (1 working order, (2) need some attention)
Sheppard 2-box rail system w/scales.
Hydraulic driven motor to unload trailer.
C & M 8-row carousel setter, hydraulic stack fold, 3-pt.
Lannen 8-row carousel setter, mounted on KMC 7x7 stack fold tool bar, 3-pt.
(6) Ford buses converted to drag belt to haul green tobacco, w/roll over tarps.
(2) Ford buses converted to haul plants.
Ford bus used to transport laborers.
Note: All buses are diesel, automatic transmission, air brakes.
John Deere 6000 hi-cycle, SN-000178, 2-post roll guard w/canopy, easy ride front end, set up to spray 8-rows.
John Deere 6000 hi-cycle, SN-003006, w/topper valve, set up to spray 8-rows, has cab but missing some glasses.
John Deere 6000 hi-cycle, w/cab, sells w/Powell 4-row topper – machine is minus tank & pump.
Sheppard 4-row lay by rig, mounts on hi-cycle.

EXECAVATOR, TELE-HANDLER, TRUCKS.
Cat 312BL excavator, cab, 28” pads, hydraulic thumb, w/36” bucket, 7656 hrs.
Clean out bucket – last on 312BL
V ditching bucket, last on 312BL
Cat TH407 tele-handler, 4x4, cab, 48” forks, 15.5-25 tires, 5197 hrs., SN-TBY01389.
1988 Mack RD690 road tractor, 6-cyl. diesel, 6-speed, air brakes, 22.5 Budds front, 24.5 Budds back, sliding 5th wheel tandem, 190” wheel base, wet line kit, 520,906 miles.
1998 Ford 11-passenger van, 8-cyl. as, automatic, below eyeline mirrors, 16” tires, 293,365 miles.
2006 Ford F350, 4x4, 4-door, Powerstroke 6.0 diesel, 17” tires, w/Knapheide service body, 176” wheel base, 254,180 miles.
2007 IH 4300 cab & chassis, DT 466 diesel, automatic, air brakes, west coast mirrors, 22.5 Spokes, 256” wheel base, needs engine.
2006 Ford 350, 4x4, 4-door, automatic, 18” tires, been wrecked, good cab, transmission & rear end.
1999 IH 9400 Eagle, Cummins N14 diesel, 9-speed, air brakes, west coast mirrors, 22.5Spokes, 197” wheel base, 787K, needs engine – locked up.
1991 KW T600, sleeper cab, road tractor, Detroit Series 60, 10-speed, 22.5 Budds, air ride suspension, sliding 5th wheel, blown head gasket.

EQUIPMENT.
KMC 8-row ripper bedder, hydraulic fold, spring reset shanks, 3-pt.
KMC 8-row hydraulic fold row incorporator.
Lilliston 4-row rolling cultivator, w/hydraulic driven fertilizer, 3-pt.
(2) KMC 4-row rolling cultivator, (1) w/ground driven fertilizer.
4-row rigid shank cultivator, w/adjustable gauge wheels, 3-pt.
4-row bed shaper, 3-pt.
(2) John Deere 12-row hydraulic fold row markers.
(4) KMC row incorporator row units.
Backhoe buckets,(1) 3’, (1) 2’, (1) 14”, (1) V ditch.
Bale squeeze - fits on forklift, will handle (2) bales of tobacco or (4) bales of cotton.
Massey Ferguson 1050 feed mill, could use some work.
(2) Pride of the Farm 3-ton hog feeders.
(2) Pride of the Farm 1-ton hog feeders.
2013 Ford F350 dually pickup bed.
2013 Ford F350 dually rear bumper
2013 Ford F350 dually gooseneck hitch.
(2) Taylor modular builders.
PTO winch, 3-pt., made from Franklin skidder, hydraulic controlled.
Knapheide 8’ service body.
Ingersoll Rand air compressor w/Kohl 12.5 motor.
All equipment on 46”.


EQUIPMENT FROM NEIGHBORING FARMER – STEVE GRADY.
Case IH 635 AFS, 6-row modular cotton picker, SN-YCT017822, 4x4, 500/950.32 dual front wheels, 23.5L5526 rear tires, 1806 engine hrs., 1256 fan hrs.
2012 Amadas 9970 CDS, 4x4 peanut combine, 6-row header handles 38” rows, dump basket, approx. 2000 hrs. on engine, 800/65R322 front tires, 18.4-26 rear tires, combine SN-500193, header SN-501092. (2) Amadas ADI6 Yield Save, 6-row peanut diggers, hydraulic driven.
John Deere 7230, SN-H652274, power quad transmission w/left hand shuttle, 540 & 1000 shift-on-the-go pto, (3) sets dual remote hydraulic outlets, 11:00-20 SL front tires, 460/85R39 rear tires, 4368 hrs.
KMC 6-row hydraulic fold peanut lifter, 540 pto.
EZ Trail 510 grain cart, 1000 pto, hydraulic auger, shed kept.
John Deere 1720, 12-row, 38” vacuum planter, stack fold, w/monitors.
Case IH Early Rise 1230, 12-row, 40” no-till planter, no-till coulters, no-till trash blades, stack fold.
KMC 12-row stack fold bedder, 38”, w/sod buster shanks, dirt door, gauge wheels.
Unverferth 12-row ripper/stripper,40”, hydraulic fold, gauge wheels, automatic reset rippers.
KBH 12-row nitrogen applicator, hi-clearance, pull type.
KMC 6-row ripper bedder, 38”.
KMC & Lilliston 4-row rolling cultivator w/fertilizer, will go to 48”.
Woods S20CD frail mower, 20’, 1000 pto, 3-pt. new clutch.
Reynolds 15 yard all hydraulic pan, pull type, (4) 17.5-25 rear tires, hooks to tractor drawbar.
Garfield 8’ box blade, w/hydraulic lift & tilt cylinder, pull type.
24’ x 8’ w/8’ flat platform (platform is 4 ½’ off ground) portable loading ramps, tandem axle, w/steel grate for floor, been used for skid steer to run on to load litter.
Approx. 2000 gal. LP gas tank mounted on ‘83 Ford F700, V8 LP gas, 4-speed w/2-speed, 9.00-20 Spoke wheels,
’05 GMC Canyon, 4x4, Vortex 3500 engine, automatic, 4-door, 15” tires, has farm bruises.
’00 Ford Ranger, 2.5 gas, 5-speed, 15” tires, 190K miles.
’84 Chevrolet ¾ ton pickup, 4x4, 6.2 liter diesel, automatic, 15” tires, 63,778 miles, has new motor.
’90 IH Blue Bird, DT466, automatic, aIr brakes, 22.5 Budds, 145K miles, passenger bus, good.
’76 Ford F350, V8 gas, 4-speed, 12’ steel flatbed, west coast mirrors, 16” tires, 85, 544 miles.
’76 Chevrolet C60, V8 gas, 4-speed, 2-speed, 16’ twin cylinder dump, 9:00-20 Spokes, been sitting a while.
Electric sampler peanut sheller.
14.5 new tires, mounted on rims
14” implement tire, mounted on 6-hole universal rim.
Collectible Corner
5 gal. milk can
Remmington wood ammo box.

EQUIPMENT FROM NEIGHBORING FARMER – ROSS BALANCE.
JD 6410 MFWD SN-V277101, cab, power quad w/ left hand shuttle, 2 sets dual remotes, 14.9-24 front 18.4R38 rears, 4048 hrs, sells w/ JD 640 loader w/3rd function w/7’ bucket, has high capacity hyd pump, clutch is hard to press in.
Dayton 50KW surge 25KW continuous pto generator on single axle carrier, 540 pto.
200 gallon sprayer, 36’ hydraulic fold booms, 3pt.
KMC 14’ field cultivator, 3pt.
Ken Ben 34’x8’ gooseneck flatbed trailer, tandem axle, 16” tires, 2 5/16 hitch.
Shop made 7’x24’ gooseneck stock trailer, 2 divider gates, left hand sliding rear gate, tandem axle, 16” tires.
Shaver hydraulic post driver, 3pt., this is the big model.
JD 14’ rotary cutter, 3pt., 1000 pto.
Vicon wig wag spreader, 3pt., 540 pto.
JD slab weights.
3pt. bale spear, loader forks & bale spear—Westendorf hookup.
Guardrail, approx. 500’.
550 gallon flat bottom nurse tank.
McHale round bale handler, last on 640 loader.
14’ dump body made out of truck chassis, dual wheel, pin hitch.
Sheppard 300 gallon sprayer, 38’ hydraulic fold boom, hydraulic pump, 3pt.
(3) Behlen 4-hole super waterers, new.
Apache 150 bu creep feeder, galvanized minus creep grates.
DMI 2500 5-shank ripper w/ Berm tucker wheels.
JD single axle feed cart, 540 pto, pin hitch.
Keltec bale handler, slices bale & holds netting last on 640 loader.
New Idea 3715 manure spreader, poly floor, 540 pto, pin hitch.
Vermeer 703 disc mower, 540 pto, 3pt., 10’ cut.
JD 8200 grain drill.
4’x10’ steel stock trailer, single axle, 14” tires, pin hitch.
Great Plains Solid Stand I5 grain drill w/ coulter cart, 15’ pull-type.
NH 169 6-basket hay tedder, 540 pto, pull-type.
JD 6’ rotary cutter, 540 pto, 3pt.
8’ road blade, 3pt.
10’ box blade, 3pt.
(2) Pequea 520 feeder wagons, dolly front.
6’x12’ tandem axle stock trailer, pin hitch, center divide gate, sliding rear gate.
Vermeer 504M silage round baler, SN-1VR3131G861000144, wide pickup, twine & net, bale ramp, 540 pto.
(7) Behlen 10’ all poly feed bunk.


Auctioneer’s Note: Vic is discontinuing his tobacco farming operation to devote more time to the direct-to-the-consumer peanut business.
For more info call or text Vic @ 919-738-0158.

Auctioneer’s Note # 2: Steve Grady Farms, the adjoining farm, is changing their operation from peanuts & cotton, but will continue in cattle, turkeys, & swine. Note low hours on equipment.
For more info call or text Steve @ 919-222-8239.
 

Terms & Conditions
Internet Fees: 3% with $750.00 max per item. Minimum fee of $25.00 per item.

Methods of Payment Accepted: Checks with prior approval, cash or wire transfer. Wire transfer must be received by the auction company within 48 hours of the auction & will be an extra fee of $25.00. Credit Cards are NOT accepted and only used as a verification tool. Please contact the auction company for wire transfer instructions. Sales tax will be collected unless we have on file a completed sales tax exempt form.

Currency Type: USD
Shipping Instructions: Buyer is responsible for all shipping logistics and costs.

Preview Date & Times: Thursday and Friday 8:00am to 5:00pm
Checkout Date & Times: Purchases must be removed from auction site within 3 days of sale unless prior arrangements are made.

Special Terms
All property sells as is where is with all faults, with absolutely no warranties implied or expressed in any way. All Serial Numbers, models, size, mileage & hrs. unverified and ALL SALES ARE FINAL. Property is open to thorough public inspection. It is the Bidder’s responsibility to determine condition, age, genuineness, value or any other determinative factor. E.B.Harris Inc./Auctioneers may attempt to describe the merchandise in advertising, on the Internet and at the auction but makes no representations. In no event shall E.B. Harris Inc./Auctioneers Inc be held responsible for having made or implied any warranty of merchantability or fitness for a particular purpose. Bidder shall be the sole judge of value.
Bidders who bid from off site and are not present at the live auction or preview understand and acknowledge that they may not be able to inspect an item as well as if they examined it in person. It is the Bidder’s responsibility to determine condition, age, genuineness, value or any other determinative factor.
E.B. Harris Inc./Auctioneers will not be responsible for any errors or omissions in the description of the merchandise unless it is a material and intentional misrepresentation of the item itself. Bidder agrees that everything is sold as is and that they may not return any item they purchase.
E.B. Harris Inc/Auctioneers is providing Internet pre-auction and live bidding as a service to Bidder. Bidder acknowledges and understands that this service may or may not function correctly the day of the auction. Under no circumstances shall Bidder have any kind of claim against E.B. Harris Inc/ Auctioneers or anyone else if the Internet service fails to work correctly before or during the live auction. E.B. Harris Inc./Auctioneers will not be responsible for any missed bids from any source. Internet bidders who desire to make certain their bid is acknowledged should use the pre-bidding feature and leave their maximum bid before the auction begins. E.B. Harris Inc./Auctioneers reserves the right to withdraw or re-catalog items in this auction.
You will receive a phone call or text message from a representative with E.B. Harris Inc./Auctioneers that you are the successful bidder & you can come pick up your item. Wait for this phone call before coming to pickup your item.

The auction company reserves the right to offer property in separate sales, combinations thereof or as a whole.

Announcements made sale day take precedence over printed matter.
Please read all Terms and Conditions before bidding. By Bidding, you are agreeing to these Terms and Conditions .