LOGGING & HEAVY EQUIPMENT AUCTION
DOUBLE AA LOGGING & OTHERS
SATURDAY – 29TH SEPTEMBER - 9:30 AM
WARRENTON, NC
Directions: From Warrenton, NC take Hwy. 58 south 9 miles, sale on right. From Nashville, NC take Hwy. 58 north 28 miles & watch for signs. If you are traveling Hwy. 43 @ Grove Hill community watch for auction arrow pointing west. Coming from I-85 in Henderson, take Hwy. 39 south thru Henderson, just past Bojangles @ fairgrounds turn left on Vicksboro Rd., go 12 miles to 401, straight across on Lickskillet Rd. for approx. 12 miles to Pete Harris Rd., straight across, sale site 1 mile on right. Also 1 hr. drive north of Raleigh, NC & 2 hr. drive south of Richmond, Va. Watch for signs.
Sale Site Address: 2252 NC Hwy. 58 – Warrenton, NC 27589 – same location as cow pasture sale.
SKIDDERS, LOADERS & CUTTING MACHINES.
’04 Franklin Q70C Series 2000 skidder, SN-18567, 6BT Cummins, 6-speed power shift, chemical/water fire extinguish system, ac/heat, am/fm, lights, 30.5-32 tires, single ½ turn 120” grapple, winch, hydraulic blade, 5031 hrs.
’98 Franklin 170 skidder, John Deere Power Tech 6.8L diesel, 4-speed power shift, 30.5-32 tires, single arch 99” grapple, winch, hydraulic blade, dual wheel adaptor, heavy drive lines, ac/heat, am/fm, lights.
√ ’ 97 Timberjack 460 skidder, SN-974342, single arch, winch, 32” tires.
’99 Franklin 170 skidder, John Deere Power Tech 6.8L diesel, 4-speed power shift, 30.5-32 tires, single arch, winch, hydraulic blade, fire damaged, some good parts.
’04 Prentice 384, SN-D384PR60234, 6BT Cummins, Prentice 548 grapple, heeling boom, cab, air, joy stick control, mounted on Evans tandem axle carrier, 11-22.5 Spokes, 3576 hrs.
’99 Barko 225, SN-22060, 6BT Cummins, 52” grapple, cab, air, stick control, mounted on Pitts carrier, 11-22.5 Spokes, 15,000 hrs.
√ ’98 Prentice 210E knuckleboom loader, plumbed for saw buck, stick control, 16,052 hrs., SN-53257.
’97 Tiger Cat 726, SN-7260845, 6BT Cummins, hydro static transmission, 67.4-26 tires, air, 20” Koring head, 2 piece teeth on head.
’93 Tiger Cat 726, SN-7260270, Cat 3116 diesel, 67.4-26 tires, 20” Koering head, 2 piece teeth on head, 2000 hrs. on rebuilt engine.
√ ’98 Hydro Ax 611EX, SN-678, 22” Hydro Ax saw head, 67x34x25 tire.
BULLDOZERS.
√ Caterpillar D6E , SN-2MJ01625, RPOS, forestry package, straight 12’ blade w/twin tilt, drawbar, 2280 hrs., original undercarriage, appears to be another 550 hrs. of use before bushings in the rails need to be turned for the first time. If you are in need of a machine of this size that is in like new condition, this is a rare find – in excellent condition.
√ Fleco 12’ clip on root rake.
√International Dresser TD15C, SN-42400020001587, 12’ hydraulic straight blade, power shift, ROPS, 90% undercarriage.
TRUCKS, LOWBOY, TRAILERS.
‘99 Kenworth W900, conventional, 425 Cat, 9-speed transmission, cab lights, ps, am/fm, air, 11R24.5 Budds, (2) 90 gal. fuel tanks, 5th wheel, live tandem, aluminum headache rack w/tool box, dual exhaust, Neway air ride suspension, west coast mirrors, 50,000# rears, 172” wheel base. 657,571 miles. Mr. Autry said it was a pulling truck.
‘94 Kewworth T800, conventional, 3406 Cat, 9-over, am/fm, air, 11-22.5 Budds front, 11-24.5 Budds rear, aluminum fuel tanks, sliding, live tandem, 208” wheel base, west coast mirrors, air ride suspension, 918,222 miles, (140,000 mile on new G. Poole remanufactured engine), approx. 120,000 miles on transmission, rear ends).
√’99 International Eagle, N14+ Cummins diesel, 10-speed Road Ranger, air ride suspension & cab, sliding 5th wheel, twin aluminum 85 gal. step fuel tanks, 11-22.5 Budds, aluminum front wheels, 198” wheel base, 333,000 miles.
√ ’91 International 4900, 466 engine, 10-speed transmission, air ride, Hendrickson walking beam suspension, 11R22.5 front tires, 10:00-20 rear tires, dual 50 gal. fuel tanks, hydraulic outriggers, w/Morgan overhead rail crane used to handle precast concrete, 306,012 miles.
√ ’88 Kenworth T600, sleeper, 350 Cummins, 9-speed, 11R24.5 Budds, aluminum fuel tanks, 216” wheel base, Reco suspension.
√ ’85 White Volvo cabover, 300 Cummins, 7-speed, 11R22.5 tires, dual 100 gal. fuel tanks, Hendrickson suspension, 140” wheel base, 304,214miles.
√ ’89 Mack CH613, E6-350 engine, 9-speed transmission, sliding 5th wheel, 11R24.5 aluminum front, 11R22.5 rears, air ride cab, dual 80 gal. fuel tank, aluminum tool box, 499,262 miles, Mack from front to rear.
√ ’80 Mack V, 5-speed, sliding 5th wheel, 140” wheel base, 10:00-20 Spokes, dual 85 gal. step fuel tanks, 394,287 miles, pull out special.
’01 Chevrolet 3500, Duramax, diesel, crewcab, 6.6 turbo, Allison auto 5-speed, cab lights, ps, air, 235/85R16 Budds, twin fuel tanks, below eyeline morrors, Knapheide service body, 168” wheel base, 105,050 miles.
1995 Ford F250, 5.8 Liter V8 gas, automatic w/overdrive, king cab, 8' bed, 220K miles, good truck.
’86 Ford 600 fuel truck, 370 V8, gas, 5 –speed, 2-speed, 9:00-R20 Spokes, 50 gal. step fuel tank, west coast mirrors, 1660 gal. fuel tank body, 155” wheel base, 155,919 miles, new meter & pump, 4-compartment fuel tank, solid truck.
’84 Eager Beaver detach 30-ton lowboy, 20’ deck, 8’ wide, 11’, 5’ spring loaded loading ramps, ground bearing, 8 hp Kohler engine, 10:00-15 Spokes.
‘53 Rogers 21’, 20-ton lowboy, tandem axle, 10:00-15 Spokes, new brakes.
√ 21 ½’ lowboy, 13’ over rear axles, 9 ½’ wide, 5’ loading ramps, 10:00R20 Spokes, tandem axle, new wood floor. (Ray Caldwell use to move equipment for Tidewater w/this lowboy).
’98 Riley 42’ drop deck log trailer, double bunk, 11R24.5 Budds, push bar.
(2) ’97 Riley 45’ double bunk log trailers, 11R24.5 Budds.
√ (2) ’96 Bradley 42’ double bunk log trailers, tandem axle, 11R24.5 Budds, push bumper.
’97 O. T. 42’ double bunk trailer, tandem axle, 11R24.5 Budds, bush bumper.
Pitts 42’ double bunk, tandem axle log trailer, 11R22.5 Budds, push bumper.
’83 42’ double bunk, round bolster w/extension, Dayton suspension, 10:00-20 Spokes.
√ ’85 Utility combo flatbed, 48 x 102, spread axle, tie down straps, air ride, 24.5 tires on aluminum wheels.
√ (3) ’80 Great Dane 45’ x 96’ dry vans, roll up rear doors, curb side door, tandem axle, 22.5 Spokes, very good, road ready & dry.
Brown 41’ dry van, tandem axle, 11R24.5 Spokes, used as field storage trailer, wired for electricity.
√ (2) Mat trailers, Johnson & Gregory.
EQUIPMENT.
√ Galion T-500 motor grader, Series OPS, leaning wheel, grade-o-matic, tandem wheel, SN-T5000-P5-ICO3747.
√ Allis Chambers 645M wheel loader, 4x4, shuttle transmission, 6-cyl. diesel, 17.5-25 ties, 4-n-1 2 ½ yd. bucket, 4-post roll guard, SN-9020, former military.
√ (2) Army style 6-wheel drive pull out trucks, 1 – diesel, 1 – multi-fuel.
CSI saw buck, right hand, 17’ 9” table, Classic 4400.
’99 CTR 400 delimber mounted on dual wheel carrier, pentil hitch, 11-22.5 Budds, less than 2000 hrs.
CTR 42” IP, quick convert couplings, new pump, collector, refurbished 3 yrs. ago.
Maxi-Load scales, FM frequency, 15’x9’ weight platform
Industrial Air Machine AC w/Kohler Magum 10 hp electric start, mounted on single axle trailer, 7.50-16 tires, 2” ball hitch.
Hot water 220 hi pressure washer.
Hercules roll around hoist, heavy duty.
4’ x 2 ½’ steel welding table w/vise.
Cat 416C backhoe front grill.
Cat radio speakers (new).
Teel mud hog style pump w/ 110 elec. motor, on wheels.
Hurst 16'tandem axle equipment trailer
6’ yard rake, 3-pt.
6' box blade, 3-pt
Pipe hook.
Air operated gear oil pump.
Dayco electric hose machine.
Dewalt electric cut off saw.
Oregon chainsaw sharpener.
Hydraulic hose fittings, large amount.
Husquvarna chainsaws.
11 hp Honda powered 200 psi air compressor, electric start (last mounted on service truck).
Tandem wheel dolly.
11R24.5 new recaps, some mounted on Dayton & Budds.
Electric walking ladder/platform.
Continental 48 piece tap & die set.
Bolt bins & contents.
Storage cabinets.
Heavy duty hydraulic press (looks like Red Arrow floor model).
Delta drill press, bench model.
(13) 14’ x 10’ deck mats.
(5) Bridge mats, 20’ & 25’.
(8) Aluminum 22.5 Budds rims w/tires.
(4) 10:00-22 tires, regular tread, mounted on Dayton wheels, ready for the road.
√ HEAVY BEAMS –
(6) I Beams – 23’ – 33’ length, 22” high, 8 ½” wide.
I Beam - 17’ long, 14” high, 14 ½’ wide.
(2) I Beams - 28’ & 16’ long, 16” high, 8 ½” wide.
(2) I Beams – 31’ long, 24.4” high, 12 ¼” wide.
I Beam – 23’ 8” long, 6.25” high, 6.13” wide.
I Beam - 15’ long, 8” high, 5” wide.
I Beam – 18’ 11” long, 14” high, 4” wide.
53' heavy duty crane track I beams
Auctioneer’s Note: William Autry & his son, Tracy, are discontinuing their logging operation of AA Logging. They have maintained their equipment well. Be Here Sale Day & take home equipment that will work for you Monday morning in the woods.
For further info call Tracy 919-691-2345 –cell, 252-438-5810 – home or William 919-691-2347 – cell 919-693-5308 – home
√ Items marked with √ indicate coming from other loggers that sell to the highest bidder.
EQUIPMENT of BROWN & GUPTON CO. INC. – LOUISBURG, NC – Complete Dispersal
’02 Hydro Ax 411EX, 6BT Cummns, 18” head, 38L-26 tires, 3831 hrs., SN-8178.
’98 Timberjack 460 grapple skidder, 6BT Cummins, 30.5-32 tires w/dual ring attachment, hydraulic blade, single arch, winch, ac/heat, 9374 hrs.
’78 Franklin skidder, Detroit diesel, hydro static, single arch, winch, 28L-26 tires, hydraulic blade, still plenty of useful life left.
’98 Husky Brute XL235 loader, 5.9BTA Cummins, cab, air/heat, joy stick, skidder tongue attachment, w/ CTR 314TSC delimber, 6719 hrs., mounted on Pitts trailer, tandem 11:22.5 tires.
’93 Kenworth W900, day cab, 10-speed, Hendrickson suspension, 204” wheel base, aluminum fuel tanks, 11R24.5 Budds, aluminum front rims, steel rear rims, aluminum headache rack, rebuilt engine 6000 miles.
’98 Chevrolet 2500, V8, automatic, ps, good 16” tires, nice 8’ steel service body, 128” wheel base, 140,027 miles.
’06 Pitts 42’ double bunk log trailer 11R22.5 Budds, tandem, push bar, just like new. (Doug said this trailer carries 1000# more pay load than the average trailer)
Evans 42’ double bunk log trailer, 11R24.5 tires, tandem axle, push bar, will need some heat to straighten.
’74 24’ lowboy, 3’ dove, 5’ loading ramps, 10:00R17.5 Budds, motorgrader ramps, 7 ½’ neck, all metal, tandem axle, nice lowboy, may need a little welding on floor.
CTR reversible saw buck, 66” w/ reversible step up table, 14’.
(2) Deck mats, approx. 14’ x 12’.
NO BUYER’S PREMIUM ON OUR SALES.
Equipment will be moved to sale site week of sale.