
Directions: From Warrenton, take Hwy. 58 south 9 miles, sale on right. From Nashville, take Hwy. 58 north 28 miles & watch for signs. If you are traveling Hwy. 43 @ Grove Hill community watch for auction arrow pointing west. Coming from I-85 in Henderson, take Hwy. 39 south thru Henderson, just after Bojangles @ fairgrounds turn left on Vicksboro Rd., go 12 miles to Hwy. 401, straight across on Lickskillet Rd. for approx. 12 miles to Pete Harris Rd., straight across, sale site 1 mile on right. Watch for signs.
John Deere 6500 hi-cycle, 3-wheel, diesel, hydrostatic, cab w/air, 60’ front fold booms, 20” spacing, extra auxiliary hydraulic outlets, 3600 hrs., very good condition, always kept inside.
John Deere 6500 hi-cycle , 4-cyl. diesel, hydrostatic, cab w/air, radio, shock absorb front wheel, 11L-15 front tires tire, 12.4-38 rear tires, 1200 gal. poly tank, Mid Tec 220, light bar, JD flow rate controller, foam markers, 60’ booms, 5988 hrs. ,has auxiliary hydraulic outlets, SN-X004254, very good machine, shelter kept.
John Deere 6000 hi-cycle.
Case 1840 Uniloader (skid steer), 4-cyl. diesel, w/bucket
John Deere 4710, 4x4, diesel, 48 hp, E-Hydro transmission, folding ROPS, back up alarm, rear work light kit, auto style cruise control, mid PTO, 3-pt. hitch, sells 460 front loader w/4-n-1 bucket 66" bucket, w/48 series backhoe w/18" bucket., 212 hrs.
Long 2610 diesel, 2-post roll guard w/canopy, ps, like new rubber, very nice.
John Deere 950 , 3-cyl. diesel, 2-wheel drive, 2100 hrs.
John Deere 4840.
IH 766 , 6-cyl. diesel, standard transmission, 540 & 1000 pto, set dual remotes, 9.5L-15 front tires, 16.9-38 rear tires, solid tractor
(2) IH 140 w/cultivators & fast hitch, very good.
IH 584, diesel, w/IH 2250 Mount-O-Matic loader, 5’ bucket.
IH 464, diesel, new paint.
IH 240 w/belly mower.
International 706, gas, w/Schartz frontend loader.
Massey Ferguson 40B w/loader, diesel, 3-pt., forks, looks rough, runs good.
Farmall H w/ loader.
Ferguson TO20 , gas.
Oliver 550
Allis Chalmers B
Farmall MD , may be running sale day.
Ford Dexter , you can work on it when you get it home.
John Deere 40 tri-cycle, could use a little work.
John Deere 9960 , SN-00697, 4-row cotton picker, 4x4, 2450 fan hrs.
1998 GMC Top Kick 7500, 7 liter gas, 5-speed, 2-speed, air, ps, w/16’ twin cylinder dump, grain sides, 11.2-22.5 Budds, very nice truck.
1988 GMC 7000 V8 6.0L, 5-speed w/2-speed, 13’ dump w/4’ sides, roll over top, double swing out rear gate, 9:00-20 front tires, 10:00-20 Spokes rear, 66,505 actual miles, very nice truck
1995 Ford F250, 4x4, V8 gas, automatic, extended cab, has some farm bruises, put your own body on back.
1985 Chevrolet 1 ton, 4x4, 350 gas, 50,000 miles, hay spear on back, electric/hydraulic, gooseneck ball hitch, heavy duty bumpers.
1978 Chevrolet C65, V8 gas, 4-speed, 2-speed, w/16’ twin cylinder dump body, gravel sides & grain sides, Budd wheels, trailer-hitch. This is a very solid truck.
1967 International 2-ton w/60,000 actual miles.
1984 Ford Bronco II
(3) ’02 DeCloet Classic box barns, metal lined & floors, DeCloet heat exchange, damper controls, single phase, gas.
Roanoke 1-row tobacco harvester w/(2) tipping heads & defoliators.
(8) Roanoke bulk tobacco trailers.
(2) Sukup 9400 2-row tobacco plow, 3-pt.
800’ 2” Galvalum irrigation pipe, 30 & 20’ sections, push & turn ¼ locks it in, also has fittings.
Akron & Wade Rain 4 & 3” pipe, approx. 5000’, w/fittings.
6” Ames irrigationpipe.
Irrigation pipe trailer, approx. 20’.
(46) Sprinklers
(2) Large irrigation guns.
Hale 4” pto pump.
Rovatti T380E pto irrigation pump.
Rainbird 80B big sprinklers.
W&A 4-row ripper spider w/gauge wheels, set on 4’ rows, 3-pt.
W&A 4-row bedder w/poly Ferguson ground driven fertilizer attachment, gauge wheels, set on 4’ rows, 3-pt.
Lilliston 4-row ripper bedder.
Powell 4-row topper, hi-cycle mount, appears to be good, (green).
300 gal. tobacco sprayer, trail-type.
Mechanical 2-row tobacco setter, 3-pt.
John Deere 2-row bedder, 48”, 3-pt.
Greenhouse plant hauling trailer, sets approx. 7 acres.
KMC 2-row rolling cultivator, w/ground driven poly fert. attachment, set on 48”, 3-pt.
Spider 2-row Danish tine high rise cultivator.
(4) Electric motor for Powell bulk barns.
(2) Bulk Tobac turn tables.
Offsite Barn Auction: View these barns prior to auction
From Rocky Mount, NC take Hwy. 43 south for approx. 4 ½ miles to traffic light just after West Edgecombe Fire Dept., turn left on Bulluck School Rd., travel 2 ¾ miles, barns on right (Ruth Cherry /Jimmie Jernigan Farm).
(5) Roanoke 18-box barns, Tharrington heat exchanges, single phase, 10 hp.
John Deere 285 disc cutter, 9’ 6”, 540 pto, 3-pt. w/quick hitch attachment, used only 1 season.
John Deere 275 disc cutter.
Fella SM 350 disc cutter
Rhino RDM8 disc cutter.
Knight 3450 Reel Auggie mixer/feeder, w/digital read out scales, 540 pto, pull type.
2004 McHale hydraulic bale wrapper, pull type.
Morra 2260 disc cutter, 8’, 540 pto, 3-pt.
Morra MH 4-basket hay tedder, trail-type, 540 pto, folding.
Pequa 8’ hay tedder, 540 pto, trail-type (it’s a flipper type).
Lely Lotus 675 hay tedder.
New Holland 488 haybine, 9’ cut, 540 pto.
New Holland 276 square hay baler, 540 pto, twine tie.
’03 John Deere 567 round baler, mega wide hydraulic pickup reel, net wrap & twine tie, bale kicker, 540 pto, high moisture kit, 8790 bales, always sheltered, excellent condition.
John Deere 330 round baler, w/additional hydraulic switch valve for single remote tractors, if you would like, nice.
John Deere 410 round baler.
John Deere 328 square hay baler, 540 pto.
New Holland 855 round baler.
New Holland 256 side delivery hay rake, pull type.
New Holland 255 tedder rake, very good.
Hesston BP 25 tub grinder.
Southwest cattle working chute, left hand controls, manual head gate, right hand side & front exit, butterfly rear gates, heavy duty.
Big Valley M1 cattle working chute, automatic head gate,(new).
(2) Graves square hay bale loaders, ground drive, attaches to side of trailer or truck.
6’ loader bucket , last on IH 2250 loader.
Hay spear , last on IH 2250 loader.
Worksaver hay unroller, 3-pt.
Set pallet forks, last on IH 2250 loader.
Round bale hay cart.
6’ cedar fence post.
3-pt. post puller.
18’ tandem axle stock trailer, steel floor, pipe & wire sides, ball hitch, center divider, back gate slides from either side, pipe across top keeps stock in, well made.
16’ stock trailer, bumper pull, excellent condition.
14’ all steel tandem axle hay feeding trailer, single wheel, bumper pull.
Dearborn 1-row corn snapper, 540 pto, pull type.
5 liter pour on cattle dewormer/fly control.
Cattle corral panels , new & used.
Livestock gates , various lengths, new & used.
John Deere 6x4 diesel gator, w/1990 hrs.
John Deere 148 hydraulic frontend loader w/bale spear, last mounted on JD 4440.
100KW generator, 3-phase, powered by Detroit diesel, self-contained, fuel tank, on skids, has powered (10), 10 hp barns on 3-phase & (7) 10 hp barns on single phase.
Befco GR+282, 82” turf grass seeder, 540 pto, w/tiller, seed hopper & rear cultipacker drum, 3-pt., good.
Gooseneck 9’ steel flatbed w/recessed 2 5/16 ball hitch, drop down rear receiver hitch, very nice bed, ideal to replace 8’ body on most any pickup, complete w/lights.
Land Pride RCP 2660 long reach cutter, all hydraulic, used less than 200 hrs.
Woods 214 rotary cutter, 540 pto, trail-type, has cable to assist in raising & lowering wings.
Sidewinder 7 ½’ rotary cutter, w/pair tandem twin tailing wheels, 540 pto, 3-pt., very good.
Hardee H-360-CO ditch bank cutter, always shelter kept.
Hurst 16’ equipment trailer, tandem axle, loading ramps, 2 5/16 ball hitch, electric brakes & lights, new.
Farmhand 16’ dual axle tilt trailer.
Ranchhand front end replacement/bumper, fits Ford, Chev., Dodge, you pick the year model, new.
John Deere 2-bottom switch plow, 3-pt.
IH 440 4-bottom plow.
MF 4x16 offset bottom plow, w/gauge wheels.
King 12-tine chisel plow, 3-bar, 3-pt.
9-tooth spring tooth tiller.
IH 295 5-row no till planter, 3-pt., mounted on tandem bar carrier.
Blanton 9-shank chisel plow, 3-pt.
Athens 756, 10-shank chisel plow, 3-bar, 3-pt.
Athens 163 , 28-blade gang disc, tandem wheels, trail-type, could use new set of blades, heavy cutting harrow.
2-row bedder , 3-pt.
IH 200 shank type 2-row cultivator, w/fertilizer drive minus hoppers.
IH 2-bottom plow, 1-pt.
?Reynolds? 3 ½ yd. hydraulic dirt pan, trail-type, hooks to tractor draw bar, (2) wheels in rear.
Lely Roterra RH400/30, pto, 3-pt.
Gravity flow grain box, approx. 150 bu., mounted on 4-wheel wagon.
Gravity flow grain tank, pull type, wildlife special.
Danish tine 2-row cultivator, 3-pt.
Long tandem axle peanut trailer, it can also be used for hauling shavings, grain, or whatever you like.
Adams pull type road grader.
KMC 4-row ripper outfit w/JD 71 flex planters.
6’ box blade , 3-pt.
6’ blades, 3 & 1-pt.
Dirt scoop, 3-pt.
Danuser hole digger, approx. 6” auger, 540 pto, 3-pt., heavy duty.
Hole digger , 540 pto, 9 & 12” augers, 3-pt.
9’ belt driven rotary mower.
5’ rotary cutter.
John Deere 400 rotary hoe.
Long 6” , approx. 40’ grain auger, 540 pto, trail-type.
(3) 6” approx. 10’ bin unloading auger, w/drive heads
Bin sweep.
8” x 18’ auger.
7 ½ hp electric motor, 740 rpm, 3-phase.
IH 7’ grain drill, pull type.
2-row subsoiler , 3-pt.
(2) 23.1-26 tires & rims, for MF tractor.
(2) 20.8-38 tractor tires, regular & rice & cane tread.
(5) JD front tractor weights, for 10 & 20 series tractors, bolt on type.
(4) Dura/Heat D-H 2304 space heaters.
Fiberglass camper shell for full size truck.
(2) 100 gal. poly tanks.
Scaffolding bucks.
Aluminum brake.
(2) 11:00-16 front tractor tires, 95% new.
Farmall H rear end & transmission, complete.
8 ½’ cultipacker , pull type
5-shank Graham Hoeme chisel plow, 3-pt.
5’ disc harrow, 3-pt.
2-bottom plow, 3-pt.
Woods RM360 5’ finishing mower, 540 pto, 3-pt.
5’ rotary cutter , 3-pt.
Pair of registered Percherons born April ’02, weigh approx. 1750#, approx. 17 ½’ tall, half sisters, halter broke & waiting for their first time to be hooked & harnessed, gentle.
Pat – a 12-year old red Sorrel mare mule, approx. 1500#, works single or double, rides, great w/kids.
Old timey doctor’s buggy.
(2) Steel cleated wheels for Farmall tractor.
IH 1-row subsoiler, 2-pt. fast hitch.
IH dirt scoop, 2-pt. fast hitch.
Horse drawn hay rake.
1-horse buck board , 3-wheels.
Approx. 100 gal. stew pot.
Stacks of fresh saw cedar lumber.
(100) 1” & 2” pine boards, 4,6,8,16 & 18” wide, from 12’ to 24’ length.
(15) ¼ x22” x 8 maple.
(40) Cedar, 1x6, 8 & 10’ long. All fresh cut.
(20) Walnut – 1 ¼ x8, 8’. All fresh cut.
(20) Cherry – 1x8, 10’ . All fresh cut.
(50) Oak – 1x6, 10, 16, 8 –16’ long. All fresh cut.
This sale usually has a large number of tractors, trucks, & 100’s of pieces of farm equipment. If you are looking to buy or sell hay, livestock, or any other kind of equipment, this will be the sale for you to attend. Carefully read the note below regarding when equipment needs to be received. Call office for commission rates before bringing equipment – this could save you time & money.
READ CAREFULLY ! ! Equipment will be received @ sale site beginning Monday 30 th April – Thursday 3 rd May l 9:00 am – 5:00 pm. ITEMS TAKEN ON THESE DAYS ONLY!!! SATURDAY WILL BE FOR SELLING ONLY!!!
Sale will be lined in manner which will enable us to run two sales simultaneously – one from each side of truck – Check web site for updates.
Note: ’06 Cow pasture sale had in excess of 1500 people to come thru the gates. 1 of the customers made the statement when he was leaving, it gets bigger & better every year, & if I am alive I plan to be here next year – I had a good time.