CONSTRUCTION & FARM EQUIPMENT AUCTION
RALPH BRITT Jr. & OTHERS
SATURDAY 8 TH MARCH – 10:00
MT. OLIVE, NC
Directions: I-40 travelers, take the Faison Exit, go north on Hwy. 403 traveling thru Faison for approx. 4 miles, turn right on Beautancus Rd. This is also approximately 5 miles south of Hwy. 55. Watch for posted auction signs.
SALE SITE ADDRESS: 1883 Beautancus Rd. – Mt. Olive, NC 28365
CONSTRUCTION EQUIPMENT.
Cat IT24F , SN-4NN99538, rubber tire loader, 4-cyl. diesel w/Turbo, cab, 17.5-25 tires, w/99” 2.4 yd. bucket, good solid machine, 4901 hrs.
Cat 4 yd. 94” bulk material bucket, quick attach.
Cat 48” loader forks, quick attach.
’03 Case CX 210 excavator, SN-DAC 0721422, thumb, air, 5612 hrs.
Prime 804 hydraulic dirt pan, 8’ yd, pull type, nice.
Marine 20’ box blade, 3-pt.
TRACTORS, FORKLIFT, & TRUCKS.
John Deere 4230 , SN-30342R, powered by 100 hp 6-cyl. diesel, quad range transmission, (2) sets dual remote hydraulic outlets, 4-post roll guard, 11:00-16SL front tires, 18.4-3838 rear tires, ?3427? hrs. Note: this engine has a turbo which steps up hp to a 4430.
John Deere 4020 (late model), SN-231920R, powered by 94 hp 6-cyl. diesel, synchro-range, differential lock, 540 & 1000 shift-on-the-go pto, (2) sets dual remote hydraulic outlets, 7.50-18SL front tires, 18.4-34 rear tires, sells w/JD 158 front loader – runs off tractor remotes, 6’ bucket.
John Deere 4020 , (late model) SN-257198R, powered by 94 hp 6-cyl. diesel, synchro-range transmission, differential lock, 540 & 1000 shift-on-the-go pto, 11:00-16 front tires, 18.4-38 rear tires.
John Deere 2440 , SN-370655T, powered by 60 hp 4-cyl. diesel, standard transmission, differential lock, 540 pto, set dual remote hydraulic outlets, 2-post roll guard w/canopy, 7.50-18SL front tires, 15.5-38 rear tires, 5881 hrs.
John Deere 4020 (late model), SN-226152R, powered by 91 hp 6-cyl. diesel, (power shift transmission needs repair).
John Deere 4555 , SN-1116, powered by157 hp 6-cyl. diesel, quad range transmission, (3) sets dual remote hydraulic outlets, 1000 pto, cab, 16.5L-16.1 front tires, 20.8-38 rear tires, 9402 hrs.
Case IH MX 170 MFWP , SN-JJA0097312, powered by 145 hp 6-cyl. diesel, 16-speed power shift, left hand shuttle, 540 & 1000 shift-on-the-go pto, (3) sets dual remote hydraulic outlets, cab, 14.9R30 front tires, 18.4R42 dual rear tires, 1673 hrs.
Ford 8830 MFWD , SN-A927699, powered by 155 hp 6-cyl. diesel, 18-speed power shift, 1000 shift-on-the-go pto, (3) sets dual remote hydraulic outlets, cab,18.4-16 front tires, 20.8R-38 rear tires, inside spin out rims.
IH 140 & Super A
TCM FG25 forklift, 5000#, 3-stage mast, squeeze forks, dual wheel, 7:00-12 front, 6:00-9 rear, inflatable tires, SN-65803844.
Nissan 50 forklift, 4000#, LP gas, 188” height, pneumatic tires, side shift, 6545 hrs.
’98 IH 4800 all-wheel drive, DT466E diesel, automatic, ps, air brakes, air, cruise, 385/65R22.t Spokes front, 48x31.00-20 Spoke rear, w/Chandler stainless steel spreader body,, 24” chain, twin spinners, Med-Tec controller, 158” wheel base, 79,676 miles, very nice.
’88 IH 4900, DT6 diesel, automatic, air brakes, 11R22.5 Budds front, 48x31.00-20 Budds rear, w/Chandler Mdl. 1167 stainless steel spreader body, 24” chain, twin spinners, Med-Tec controller, 218” wheel base, 167,967 miles, good.
’85 Chevrolet C70, 427 V8 gas, 5-speed w/2-speed, ps, booster brakes, 9:00-20 Spokes front & rear, 18’ twin cylinder dump, 24” metal head board, 190” wheelbase.
’85 Chevrolet C65, V8 gas, 4-speed w/2-speed 8.25-20 Budds, 16’ twin cylinder metal dump, 28” head board, 49,139 miles. Vic thinks throw out bearing needs attention.
70’s Ford F700 cab/over truck, 8-cyl. gas, 4-speed w/2-speed, 9;00-20 Spokes front, 8.25-20 Spokes rear, 18’ twin cylinder dump, 26” metal head board, cab rough, good bed to mount on another truck if you would like.
’81 Ford F350 flatbed, 8-cyl. gas, 4-speed, 13’ flatbed w/trailer hitch.
’78 GMC 6500, V8 gas, Duplex transmission, ps, 10:00-20 Spokes, tandem, w/20’dump (needs pump for dump).
’93 Chevrolet K1500, 4x4, 454, 4-door, 250 gal. baffled water tank, Reading service body.
’97 Chevrolet Cheyenne 2500, 4x4, 8-cyl. gas, automatic, 8’ bed.
’92 Chevrolet 1500, 4x4, gas, 8’ bed.
’87 Ford 15-passenger van, V8 gas, automatic transmission.
’86 Ford F700 service truck, has mounted in rear hydraulic power pack to pull tobacco baler, V8 gas, 4-speed w/2-speed.
’82 Ford school bus, 8-cyl. gas, seats removed, ready for hauling.
PRODUCE EQUIPMENT.
Stanhay Precision 8-row vegetable planter, (4) twin rows, gauge wheels, 150” tool bar, pto drive, 3-pt., manufactured by Hendrix Dail – Greenville, NC (used 1 season), very nice.
Monoson 2-row planter, poly planter boxes, fiberglass insecticide hopper, wide press wheels, poly fertilizer hoppers, ground driven, 3-pt.
Kencove 4-row waterwheel hole puncher, 3-pt.
Turnip size vegetable line, 4’ x 4’ bin, approx. 18’ conveyor.
Flat drip pipe , blue, collaspable, miles of it..
Cardboard boxes for vegetables.
Wooden produce crates, approx. 1 bu. (full pallet)
78” x 52” vegetable grader/washer for cucumbers, turnips, peppers, etc. w/10’ out put, poly chain driven rollers, in 10’ in put platform, single phase, electric motor.
31’ x 28” vegetable washer for greens, Chinese vegetables, etc.
TOBACCO & IRRIGATION EQUIPMENT.
Holland 4-row carousel transplanter, 6-drops, mounted on 4x7x16’ tool bar, tray racks, pair jolly crank gauge wheels, nice, 3-pt.
Lannen 4-row tobacco setter, 6-cup, jolly crank wheels, floating tray holder w/caster wheels, mounted on 2 ½ x 2 ½ x18’ tool bar, set on 48” rows, 3-pt., nice.
Holland 4-row transplanter , finger-type, w/canopy, gauge wheels, 3-pt.
(2) Taylor THD 2-row tobacco harvesters w/Powell & Taylor heads, long cutter bars, dump boxes, w/JD 6-cyl. diesel engine.
Powell 1-row stripper w/chains.
Taylor leveling unit, off Taylor tobacco stripper, 1-row.
(4) Live bottom loose leaf tobacco trailers, 16’ x 8’, single axle.
(10) Tobacco trucks w/metal sides.
Long tobacco box loading bar.
Carolina greenhouse , 288 cell seeding unit (table, seeder, direct board).
Approx. 1200’ Rain Way 6” irrigation pipe, 30’ sections.
(2) ABI irrigation reels, 1050' 3.4” hard hose, turbine drive, hydraulic legs, w/150 big gun.
(4) Long Mdl. 1553 irrigation reels, 835’ 3” hose.
Hobbs Mdl. 2560 traveler, 4” hard hose, approx. 1000’, Honda gas engine rewind, w/Nelson 200 big gun.
Misc. 6” fittings.
Set Powell 4-row tobacco toppers.
(2) Mechanical finger pocket 4-row tobacco setters.
Powell Boss horizontal tobacco baler on wheels.
Hydraulic power pack powered by Wisconsin 4-cyl. gas engine (used to power tobacco baler).
TILLAGE & PLANTING EQUIPMENT.
John Deere 630 , 26’, 72-blade hydraulic fold disc, 9” spacing, tandem wheel, new blades & bearings, nice.
John Deere 425 , 13 ½’ 28-blade offset disc, 11” spacing, pull type, the cutting kind that’s hard to find.
Athens 167 , 14’, 29-blade offset disc, 11” spacing, pull type, 6 months old, nice.
King 10’ , 28-blade disc, 9” spacing front & rear, 3-pt.
Mashio 250 tiller, 8’ wide, 540 pto, 3-pt., nice.
(2) KMC 4-row rolling cultivator w/fertilizer hopper, ground driven, diamond bar, 46” rows, (5) spiders per unit, 3-pt.
John Deere 845 , 8-row Danish tine hydraulic fold cultivator, 3-pt.
KMC 8-row Danish tine hydraulic fold cultivator, 3-pt.
(2) Lilliston4-row 4-gang spider rolling cultivators w/poly fertilizer hoppers, hydraulic driven, 3-pt. (set up for tobacco).
Lilliston 4-row disc bedder (set up for tobacco).
KMC 4-row ripper/ bedder, floating parallel linkage, hydraulic fold row markers, set on 48” rows, shear bolt shanks, rippers on 7x7x18’ bar, bedders on 4x4x18’ bar.
Lilliston 4-row ripper/ bedder w/hydraulic row markers (set up for tobacco).
2-row rigid shank cultivator, 3-pt.
(2) KMC 4-row ripper/ bedder, parallel linkage, 4x7x15’ tool bar, set on 42” rows, hydraulic row markers, bracket for spray tank.
KMC 4-row ripper/ bedder, hydraulic row markers, 48” row.
KMC 2-row ripper/ bedder w/ Reddick chlorpic system, 3-pt.
KMC 4-row bedder w/dirt door, soil conditioner, 4x7x16’ tool bar.
Case IH 14 5-shank “V” ripper, auto reset.
Harrell 2805 5-bottom switch plow, on land, single tailing wheel.
PM 5-shank “V” ripper, twin wheel gauge wheels, 3-pt.
Marliss 15’ grain drill, (24) drops, 3-pt.
Sukup caddie cart, 15’, (12) no till coulters.
TRAILERS, SPRAYERS & APPLICATORS.
20’ x 8’ tri-axle trailer, 3’ dove, 5’ ramp, 14.5 tires, pin hitch.
17’ x 8’ , 4-wheel wagon, tie rod steer, pin hitch, steel body.
16’ x 8’ , 4-wheel wagon, tire rod steer, pin hitch, 2’ slotted sides.
16’ x 4’ single axle tobacco trailer, 14” tires.
10’ x 8’ single axle trailer, 8.25-20 tires, pin hitch, 20” slotted sides, will dump, used for produce.
9 ½’ x 5’ tandem axle equipment trailer, 15” tires, pin hitch, (fork lift, 4-wheeler, lawn mower)
Hurst 16’ equipment trailer, tandem axle.
John Deere 6000 hi-cycle diesel, standard transmission, SN-023101, cab, green top, front shocks, tobacco special booms, 8753 miles, SN-1080 – 4773 miles, open station, plumbed for topper.
(2) Red Ball 8-row hooded sprayers (late model).
John Blue L3055 pump, knife injectors, 200 gal. poly tank, ground driven, 3-pt.
John Blue 300 gal. aluminum tank sprayer w/L4000 ground driven pump, w/(9) drop nozzles, 28’ spray width, trail-type.
Snyder 1100 gal. green poly flat bottom tank.
Pair Ag Chempoly 200 gal. saddle tanks.
Pair 200 gal. poly saddle tanks w/universal mounting brackets, used w/water only for transplanter.
1000 gal. nurse tank on skids.
1400 gal. white poly tank, flat bottom.
300 gal. aluminum spray tank, spurge tube, large fill (just tank)
250 gal. 4-row tobacco sprayer, single axle, pin hitch, trail-type.
200 gal. poly tank sprayer w/60’ spray width, bridge boom, 540 pto high pressure pump.
200 gal. oval front mount tank & bracket.
Chemical mixing tank.
EQUIPMENT.
’89 Gremlin Kurbmaster 20’ step van converted to “Fish Buggy” (made for outerbanks) , w/6’ rear deck, cook stove, refrigerator, TV, bed, sink, shower, front mount storage cage, 16.5 tires.
Roanoke G195 Bush Axe, 5’ long reach mower, 540 pto, w/stump jumper, 3-pt.
Hardee 6’ rotaray cutter w/stump jumper, 540 pto, single solid rubber tailing wheel, 3-pt.
5’ rotary cutter, 540 pto, 3-pt.., single tailing wheel.
Winco pto generator on single axle carrier, 35KW, just like new.
Nissan forklift, 4-cyl., LP gas, 188” 3-stage mast, side shift (parts forklift).
Ressori spin spreader, 540 pto, 3-pt.
(2) 2-post roll guard w/canopy, last mounted on JD 4020, these look like an after market brand.
John Deere double front mounting bracket & weights.
John Deere 18.4-38 , 9-hole, small center tire & rm.
Case IH suitcase weights, (late model).
Pair John Deere 4-wheel drive front fenders, (7810).
Pair John Deere big hubs, 10-hole pattern.
Hog Slat stainless steel hog feeders.
Hog Slat hog panels, 8’ & 6’, 42” high.
Cattle corral panels.
Livestock gates , various sizes.
(2) SI hay/feed wagons, 20 & 24’
Pour on cattle dewormer.
Rubbermaid approx. 100 gal. cattle watering tank.
(36) Rolls barb wire, new, heavy duty.
Gasing rig , 3-pt.
Approx. 5000# hydraulic pallet jack.
1000 gal. fuel tank w/electric pump.
500 gal. fuel tank w/electric pump.
“L” shaped fuel tank w/DC pump.
Honda “Big Red” 3-wheeler.
John Deere weight brackets.
(2) John Deere 71 flex planter units.
(4) John Deere 71 hoppers, fiberglass.
IH 1-row fertilizer distributor.
Tons of John Deere front mount weights.
(5) Motorola radios, low band, 47.68 frequency.
Lots shop items & tools – Reddy heater, steel work table, elec. fan & stand, Howe platform scales, floor drill press, metal band saw, 2-ton chain hoist, Hobart 225 stick welder, bolt bin, metal storage rack & lots more.
Auctioneer’s Note: Ralph Britt, Jr. is selling one complete produce operation that was one of his investments. Several other farmers have consigned equipment to this sale. Be Here sale day as you will find equipment from like new to some that will offer a lot of opportunity. Bring your friend. Be sure to pull your trailer so we can load out sale day – saves fuel in the long run.
For Lease – All or Part – Northeast Duplin Co., NC – 10 minutes north I-40 – 25 Acres w/produce packing building, ice room, (2) cooling rooms, packing area, storage area w/office, (3) loading docks, green house, fuel storage, nice maintenance shop, refurbished 1800’s office, duck impoundment, storage building & open shelter, municipal water. For further info contact Ralph Britt, Jr. @ 919-738-2871.