FARM EQUIPMENT AUCTION
A. T. “Skip” THOMPSON
WEDNESDAY 28 TH MARCH – 10:00 AM
WHITAKERS, NC
Directions: I-95 travelers, take Exit 150 which is Hwy. 33, go east of Whitakers 1 mile, turn right on Speights Chapel Rd., travel 6 miles, sale site on right (Oak Forest Ln).
Traveling northwest of Leggett on Hwy. 33, go 2 miles, left on White Oak Swamp Rd., travel 2 miles to Speights Chapel Rd., turn right, travel 2 miles, sale on left. Watch for signs.
Sale Site Address: 3133 Speights Chapel Rd. – Whitakers, NC 27891.
TRACTORS, COTTON PICKER, TRUCKS.
John Deere 7810 MFWD , PIN-HO51218, powered by 150 hp 6-cyl. diesel, quad-range transmission, 540 & 1000 shift-on-the-go pto, (3) sets dual remote hydraulic outlets, cab, 16.9-28 front tires, 18.4R-42 rear tires, 3356 hrs., w/quick hitch, nice.
John Deere 7400 MFWD ,PIN-07160, powered by 100 hp 6-cyl. diesel, quad-range transmission, 540 & 1000 shift-on-the-go pto, (3) sets dual remote hydraulic outlets, 320/90R46 rice & cane front tires, 18.4R-38 rear tires, 5007 hrs., hydraulic drive remote, injection pump replace ’06, has drop down hitch, solid.
International 1486, SN-UZ1758, powered by 145 hp 6-cyl. diesel, 8-speed, ps, 1000 shift-on-the-go pto, (2) sets dual remote hydraulic outlets, cab, 11:00-16SL front tires, 20.8R38 rear tires, 7480 hrs. engine replace @ 6500, ac has been converted to new type.
International 686 , powered by 66 hp 4-cyl. diesel, 4-speed w/TA, ps, 540 pto, (2) sets remote hydraulic outlets, 2-post roll guard w/canopy, 11:00-16 front tires, 16.9-38 rear tires, 3922 hrs., universal hydraulic ends.
1973 International 544, SN-U01600, powered by 55 hp 4-cyl. diesel, 4-speed w/TA 540 pto, (2) sets dual remote hydraulic outlets, 7.5-15SL front tires, 15.5-38 rear tires, 9305 hrs., engine replace @ 7000 hrs.
Case IH 2055, 4-row cotton picker, SN-0155434, hydrostatic drive, heat/air, 500/950-32 front duals, 14.9-24 rear tires, poly row shields, 2543 hrs., shelter kept.
KBH “Mule Boy” boll buggy, tandem axle.
1989 Chevrolet 1500 Scottsdale, 4x4, 8-cyl. gas, automatic, ps, am-fm radio, below eyeline mirrors,, 235/85R16 tires, removable gooseneck ball, electric brakes, 115922 miles.
1992 Chevrolet S10, 4-cyl. gas, 5-speed, 205/75R14 tires, 147,920 miles, new motor 12-06.
IRRIGATAON, TOBACCO & PEANUT EQUIPMENT.
Long 1576 traveler, 850’ 5” hose, on 4-wheel carrier w/rotating table, 150 Nelson big gun & cart, water turbo rewind.
Hale 6x6 pto pump, 1000 pto, on single axle carrier.
1650’ Ames 4” irrigation pipe, 30 & 20’ sections.
1400’ Ring lock 6” irrigation pipe, 30 & 20’ sections.
(2) Rainbird 105C big guns on stands.
(10) Rainbird 40 sprinklers.
(2) 4-wheel irrigation pipe trailers, 5 th wheel steer, 15” tires.
Mechanical 2-row transplanter, finger type, fertilizer hoppers, 250 gal. oval water tank, trail-type.
(4) Long barns, (2) gas, (2) oil, original burners, minus racks.
KMC 2-row peanut combine, 1000 pto, SN-34774.
Roanoke Hustler 2000 peanut combine, 540 pto, SN-2105195.
Ferguson 2-row peanut fluffer, 3-pt.
(2) Paulk 2-row peanut digger/invertors, 540 pto, 3-pt.
Ferguson 6-row peanut fluffer, can be converted back to hydraulic fold, 540 pto, 3-pt.
Paulk 12” spreader, 3-pt.
Long tandem axle peanut trailer.
Long peanut trailer, single axle, (airplane tire).
(7) Roanoke peanut trailers, single axle, (airplane tires).
Roanoke 6-hole dryer, 3 ph, 44” blades.
Edwards peanut sheller.
Radsom 200 moisture tester.
(8) Insecticide hoppers, Cole & Mirco-band.
TILLAGE & PLANTING EQUIPMENT.
International 475 , 14’, 36-blade disc, 9” spacing front & rear, tandem wheels, blade scrapers, trail-type.
Case IH 3900 , 20’, 52-blade hydraulic fold disc, 9” spacing front & rear, tandem wheels, blade scrapers, trail-type.
Case IH 1820 , 8-row Danish tine cultivator, hydraulic fold, 3-pt.
John Deere 825 , 4-row Danish tine cultivator, w/rolling fenders, safety light kit, 3-pt.
KMC 2-row rolling cultivator.
King 9-tine chisel plow , 3-bar, 20” clearance, 3-pt.
John Deere 400 , rolling cruster, 16’, 3-pt.
Bush Hog 5-shank V ripper, 3-pt.
KMC 14’ field cultivator, double rolling baskets, 3-pt.
KMC 4-row ripper/bedder, hydraulic fold row markers, 38” rows, 3-pt.
International 125 , 4x16 flip bottom plow, in furrow, 3-pt.
John Deere 7300 MaxEmerge2 , 8-row vertical vacuum planter, 38” rows, 3-pt.
KMC 4-row planter, 38” rows, fiberglass hoppers, on 3-pt. tool bar.
International 800 , 4-row planter, w/insecticide boxes, 3-pt.
Cole 4-row twin row planter, 38”rows, hydraulic fold row markers, poly slide plates, in row spray attachment, gauge wheels, 3-pt.
Case IH 5300 “Soybean Special” grain drill, 10’, (18) double-disc, w/press wheels.
John Deere B 8’ grain drill, single disc, chain drag, mechanical lift.
Brillion 8’ double roller cultipacker seeder, w/grass & clover hoppers, twin roller, pull-type.
EQUIPMENT.
John Blue 300 gal. stainless steel nitrogen knifing rig, (7) 38” rows, w/John Blue LF pump, trail-type.
John Blue 300 gal. stainless steel applicator, (10) 38” rows, w/L3000 ground driven, hydraulic off/on, pto pump agitation.
1400 gal. stainless steel nurse tank on 4-wheel wagon, 5 th wheel steer, 15” tires, w/transfer pump, B/S engine.
1200 gal. stainless steel nurse tank on 4-wheel wagon, 5 th wheel steer, 15” tires, w/B/S transfer pump.
Reddick 12-row hydraulic fold boom 200 gal. Johnson fiberglass tank, hydraulic centrifugal pump, 3-pt., has remote pressure gauge & flow master monitoring system.
Reddick 4-row hooded sprayer, w/150 gal. poly tank, pto pump, 3-pt.
Johnson 300 gal. fiberglass narrow low profile tobacco sprayer, trail-type.
Chemical mixing unit.
Side mount saddle tanks & brackets.
100 bu. Gravity body on 4-wheel wagon, 5 th wheel steer, galvanized body, 15” tires.
Long 8” x52’ grain auger, 540 pto, w/transport dolly.
Long 8” x30’ grain auger, 540 pto, w/transport dolly.
The Clipper Seed Cleaner No 2B Special w/screens.
Roanoke 19’ long reach cutter, 5’ cut, 1000 pto, 3-pt.
Hardee 14’ rotary cutter, 540 pto, hydraulic solid rubber tailing wheels, heavy duty, 3-pt.
Woods HS106 side boy cutter, all hydraulic, 6’. 540 pto, 3-pt.
Rhino 10’ road blade w/hydraulic twin solid rubber tailing wheels, hydraulic tilt & angle, 3-pt.
Lely Roterra 14’, 3-pt.
2-row subsoiler , 3-pt.
Lely spin spreader , 540 pto.
Miller AEAD-200LE welder/generator, electric start, w/Kohler engine on single axle carrier.
8000 gal. above ground fuel tank, electric pump.
20’ x 8’ flatbed gooseneck trailer, wood floor, 14.5 tires, tandem axle.
Ferguson inline ditcher, 540 pto, 3-pt.
18.40-38 duals , last on 1486.
KMC 6’ 6” reach assemblies.
KMC dirt door w/row shapers.
Roanoke tobacco thread tie looper.
Allis Chalmers manure spreader, ground driven, 10.00-20 tires (floor needs 2 or 3 boards), sheltered, looks good for age.
2-horse 4-wheel wagon.
Rolls barb wire.
Barn full horse drawn plows & planters -
(2) Chattanooga 2-horse walking gang plows, brand new, never been put together.
(3) Lawson 4-drawer assortment units, bolts, spring lock, screws & accessories.
(4) Double fluted coulters, no till units.
JD quick hitch for high clearance (last on JD 7400 sprayer tractor).
Even Flow hog feeders.
Hand transplanters , mule collars & hanes
Auctioneer’s Note:
A. T. “Skip” Thompson has leased his farm & is therefore is having a complete dispersal of all his farm equipment plus some of the equipment on this sale will be equipment that his daddy purchased in previous years. Be Here Sale Day.
For further information call Skip Thompson @252-437-5691 – home, 252-450-5065 – cell.
1800’ grass landing strip on farm.
EQUIPMENT COMING FROM HALIFAX COUNTY FARMER.
New Holland 8970 , 4x4, Sn-415092, powered by 210 hp 6-cyl. diesel, power shift super steer, ps, 1000 shift-on-the-go pto, (4) sets dual remote hydraulic outlets, cab, 16.9-30 front tires, 18.4R-46 rear tires, 4841 hrs.
Ford 8770, powered by 165 hp, 6-cyl., 16-speed power shift, (4) dual remote hydraulic outlets,16” front tires, 20.8-38 dual tires, cab, hear/air, full set weights, 3260 hrs.
Ford TW15 , powered by 121 hp 6-cyl. diesel, standard transmission, differential lock, ps, 540 & 1000 shift-on-the-go pto, (3) sets dual remote hydraulic outlets, cab, 11:00-16 front tires, 18.4-38 spin out dual rear tires, 8179 hrs.
(2) Ford 7610, powered by 90 hp 4-cyl. diesel, standard transmission, differential lock, 540 & 1000 shift-on-the-go pto, set dual remote hydraulic outlets, 2-post roll guard w/canopy, 7.50-18 front tires, 16.9-38 rear tires, SN-0750177 - 10109 hrs., SN-BB45389 – 6364 hrs.
Farmall Super A, SN-282733, 4-cyl. gas, standard transmission, 3-pt. 7.60-15 front tires, 12.4-24 rear tires, w/5’ estate mower, cultivators.
John Deere 6500 hi-cycle, 4-wheel, SN-008150, 4-cyl. turbo diesel, hydrostatic transmission, 7.50-20SL front tires, 12.4-38 rear tires, 60’ front folding boom, 420 gal. black poly tank, front shock absorb, Ag-Yield monitor, 3041hrs.
John Deere 6000 hi-cycle, SN-2231, 4-cyl. gas, 4-speed standard, cab (yellow top), 11L-14 front tires, 12.4-34 rear tires, shock absorbing front, auxiliary hydraulic couplings, 320 gal. poly tank, 1525 hrs., good for sowing wheat, has done a lot of work, you determine how much more work it wants to do.
1991 John Deere 6000 hi-cycle, SN-17180, cab, (16) 3’ rows booms, rear fold, 2150 miles, appears to be in good condition, set up to spray only.
Case IH 2155 ¸4-row cotton picker, mud hog, 6-cyl. diesel, hyd. drive, 18.4-38 front duals, 14.9-24 rear rice & cane tires, air/heat, 1878 fan hrs., 2787 engine hrs., shed kept.
Taylor boll buggy, tandem axle, 15” tires, w/hydraulic driven suction fan w/flexible hose just in case a cotton misses the boll buggy or modular builder.
Taylor modular builder, 1000 pto, single wheel, manual operation.
(2) Long 40’ cotton wagon, tandem front & rear, 8’ wide.
16’ x 6’ stock trailer , tandem axle, 14.5 tires, steel diamond plate floor, pin hitch, 6’ wire panel sides, full swing center divide gate w/half slider, twin sliding rear gates, low to ground easy to load.
Roanoke 10,000 4-row peanut combine, 1000 pto.
(8) Roanoke tandem axle peanut trailers (yellow).
KMC 4-row digger invertor, has been converted to late model point.
Homemade peanut /tobacco cleaner , (Similar to Edwards), on single axle carrier, electric, 1 hp.
KMC 8-row strip till, vertical fold, late model shanks, single rolling basket, presently set on 37” will do 36 & 38”.
KMC 8-row vertical fold bedder w/dirt door, set on 37” rows, 3-pt.
Tyler 5-ton stainless steel spreader , tandem axle, 15” tires, ground driven, single spinner, 10” stainless steel chain, 540 pto.
Tyler 4-ton tender box, 8” auger, 8 hp, electric start, Kohler motor, mild steel box.
8-row hydraulic fold shielded direct spray rig, 200 gal. fiberglass tank, 3-pt.
Reddick 60’ bridge boom 300 gal. poly tank sprayer, hand washer, hydraulic fold, w/controls, pto pump, 3-pt. (shock absorbs in bridge boom).
Reddick 8-row hooded sprayer, 200 & 100 gal. tanks for under & directional spray behind, hyd. fold, 3-pt.
Lely Centerline 5L , approx. 2-ton, twin spin spreader, 540 pto, 3-pt., like new.
Case IH 5400 Mulch-Till , 15’, (24) double disc grain drill w/spray boom, 3-pt.
30’ wagon , tandem front & rear (former cotton wagon), been used for water carrier.
6’ weeder /leaf rake.
30 gal. poly tank sprayer w/broadcast boom & directional spray pto pump, note: fast hitch or 3-pt.
Approx. 300 bu. gravity flow grain boxes on tandem axle carrier.
OFFSITE GRAIN BIN AUCTION
Directions: From west side Enfield, take Ringwood Rd., take Hwy. 481 Business west thru town to Ringwoood Rd., turn right, travel 4 miles, turn on Heathsville Rd., travel .7 mi, sale site on right @ Locke Farm. View these bins before sale – they will sell @ A. T. Thompson sale site.
(3) Grain bins – 2 of these bins are 6 ring, 33” high, 1 is 6 ring, 44”high, 18’ diameter, bin sweeps, unloading augers, (2) LP gas, single & three phase dryers, w/double transits, 6” unloading auger head, 3 phase, 1 ½ hp, approx. 75’, 6” unloading auger
Equipment of Joe Stallings – Whitakers, NC
A 50 year collection of specialty tools & equipment as he is retiring from his repair & welding business. These items will be sold @ conclusion of the farm equipment auction @ Skip Thompson.
Craftsman roll around tool box, electric box fan, National 250 amp welder on cart w/leads, (2) Chicago band saws, gas cutting outfit, metal welding w/vise, Weaver 20-ton floor press, 2-ton manual chain hoist, tap & die sets – fine & coarse threads, bolt bin w/inventory, pipe die set, ¾” drive socket set up to 2 ¼”, wheel pullers, Delta 5-speed drill press, Curtis twin cylinder 5 hp air compressor, calipers, 20’ I-beam w/hoist dolly, lots of other shop related equipment.