ANNUAL WARREN COUNTY COW PASTURE EQUIPMENT CONSIGNMENT AUCTION
SATURDAY 26 TH APRIL – 9:00 AM !!! NOTE EARLY START !!!
WARRENTON, NC (INEZ COMMUNITY)
Directions: From Warrenton, NC take Hwy. 58 south 9 miles, sale on right. From Nashville, NC take Hwy. 58 north 28 miles & watch for signs. If you are traveling Hwy. 43 @ Grove Hill community watch for auction arrow pointing west. Coming from I-85 in Henderson, take Hwy. 39 south thru Henderson, just past Bojangles @ fairgrounds turn left on Vicksboro Rd., go 12 miles to 401, straight across on Lickskillet Rd. for approx. 12 miles to Pete Harris Rd., straight across, sale site 1 mile on right. Watch for signs along the way.
Sale site address: 2254 Hwy. 58 – Warrenton, NC
TRACTORS, COMBINE, COTTON PICKER.
Case IH MX 270 , 4x4, SN-99230, powered by 235 hp 6-cyl. diesel, power shift transmission, differential lock, ps, 1000 shift-on-the-go pto, (5) sets dual remote hydraulic outlets, cab, air, 480/70R34 front tires, 520/85R46 dual rear tires, quick hitch, 1910 hrs., excellent condition.
John Deere 7200 , SN-004675, powered by 92 hp 6-cyl. diesel, powrquad transmission, 540 & 1000 shift-on-the-go pto, (2) sets dual remote hydraulic outlets, 10.00-16 front tires, 18.4R38 rear tires, long axles, 4551 hrs., field ready, sells w/1 week warranty.
John Deere 4240 , SN-028110RW, powered by 110 hp 6-cyl. diesel, quad range transmission, differential lock, (2) sets dual remote hydraulic outlets, 11.00-16 front tires, 18.4R38 dual rear tires, 4-post roll guard w/canopy, 7481 hrs., sells w/JD 158 loader, 6’ bucket & bale spear.
(2) John Deere 4960, 4x4, 200 hp, cab, power shift, dual wheels, PIN 3341– 6815 hrs., PIN 9294 – 6527 hrs., owner/operator only, very good tractors.
John Deere 2840 , SN-259037, 80 hp 6-cyl. diesel, standard transmission, (2) sets dual remotes, 540 & 1000 shift-on-the-go pto, 10.00-16 front tires, 18.4-34 rear tires.
Ford 8630 , 4x4, cab, 121 hp, hrs. unknown, good tractor.
Ford 4000 , 45 hp 3-cyl. gas, standard transmission, ps, 9.00-16 front tires, 13.6-38 new rear tires, very good.
Massey Ferguson 240 , SN-#26553, powered by 35 hp 3-cyl. diesel, standard transmission, differential lock, ps, 540 pto, 2-post roll guard, 6.00-16 front tires, 13.6-28 rear tires, 4454 hrs.
Deutz D7206 , 4-cyl. diesel, standard transmission, ps, 540 pto, dual remote hydraulic outlets, 16” front tires, 16.9-30 rear tires, 4-post roll guard w/canopy, 3776 hrs., SN-573-383.
International 140, 4-cyl. gas, 12-volt, key start, w/cultivators, 5.00-15 new front tires, 12.4-24 rear tires, rear wheel weights, SN-5335.
International 140 w/cultivators, fast hitch, super nice.
Farmall Cub w/cultivators.
Farmall Super C , 12-volt, 5.50-16 single front tire, 11.2-36 rear tires,
McCormick Farmall 100 , SN-18727J, 4-cyl. gas, 6-volt, cultivators, 540 pto, 5.00-15SL front tires, 11.2-24 rear tires.
John Deere 2020 , gas, engine needs repair.
MF 35, gas(salvage tractor).
Galion grader w/Roanoke long reach cutter.
Case IH 1460 combine, approx. 3500 hrs., rear wheel housing is a 4-wheel drive kit from a cotton picker.
Case IH 854 , 5-row corn head, 36” rows.
Case IH 820 , 22 ½’ flex grain head.
John Deere 4420 combine, SN-451601, 2850 hrs., w/JD 213 grain platform, dual front tires, threshed 400 acres in ’07, used no oil, very solid machine, always been sheltered, bought new from Gay Implement – Seaboard, NC.
John Deere 3300 combine, gas, SN-195, w/13’ grain head.
Case IH 2022 Cotton Express 2-row cotton picker, 6-cyl. diesel 6BTA w/turbo & after cooler, hydrostatic, auto header height control, (18) spindles, cab, w/air, heat, radio, 18.4-34 front tires, 9.00-24SL rear tires, heavy duty wide rear axles, 1385 engine hrs., SN-JJC0013413.
TRUCKS & TRAILERS.
’02 Chevrolet 2500 HD, 4x4, extended cab, gas, automatic, 6’ bed, power windows & locks, am-fm w/ cd, 16” tires, aluminum wheels, 176,000 miles.
’00 Ford F350 XLT extended cab, 7.3L Power Stroke diesel, 4x4, 6-speed manual transmission, power windows & locks, am/fm, free lock hubs, 16” tires, 8’ bed, gooseneck ball hitch, electric & vacuum brakes, heavy duty adjustable rear bumper, 245,000 miles.
’93 IH 9400, 370 Cummins, 9-speed, 11.24-5 tires, aluminum wheels, hyd. oil tank & pto, 216” wheel base, 148,094 mi. showing, good working condition, one owner
’93 EBY 50’ x 102’ ground loader livestock trailer, air ride suspension, (5) sections w/dog house, left hand side escape door w/ramp, interior lights, rear loading lights, lighted sign, 295/75R22.5, aluminum Budds, spare tire & carrier, low profile, w/double section rolling rear door, folding loading ramp for dog house or top deck over rear compartment, very nice trailer.
1983 Wilson 48’ x96” possum belly livestock trailer, 11R24.5 tires, Budds, sprinkler system for cooling.
’90 Ti-Brook 40’ frameless dump, spring ride suspension, 11.24-5 tires, air tailgate, grain door, poly liner inside, roll over tarp, one owner.
‘05 Pro- Trak 32’ deck w/5’ dove tail, 6x8 platform on gooseneck, (3) spring loaded ramps on rear, 2-speed landing gear, tandem axle & tandem wheels, 85R16 tires, tool box, 2 5/16” ball hitch, pierced frame making the bed low & easy to load, 10,000# axles, 7800# empty, 20,000# gross.
All Star 24‘ gooseneck equipment trailer w/4’ dove tail, loading ramps, 7000# axles.
Hurst 16’ tandem axle trailer w/loading ramps, 2 5/16 ball hitch.
Hurst 6x12 & 6x10 trailers, single axle, let down rear gate, 15” tires, 2” ball hitch.
TOBACCO EQUIPMENT.
DeColet 1-row tobacco stripper.
Piper 2-row bed shaper.
Marlow 540 pto irrigation pump, trail-type.
2-row bed shaper, heavy duty.
Long box moving
Long box handling bar.
Holland 1-row transplanter, pull type.
Dixie 126-rack bulk barn w/Roanoke racks, oil, single phase, View this barn prior @ 686 Jessie Shearin Rd. – Littleton, NC 27850. Watch for sign & flagging. Will sell in tractor line.
TILLAGE & PLANTING EQUIPMENT.
John Deere H425 offset disc, 20-blade, 10 ½” spacing, new 26” blades, new tires, heavy duty disc.
Deutz -Allis chiselvator , 28’, hydraulic fold.
John Deere 2600 5-bottom plow, semi-mount, auto reset.
Ford 118 , 4x16 bottom plow, wide beam, shear bolt, trash turner, poly wear shields, 3-pt.
Massey Ferguson 82 4-bottom plow w/auto reset, in beam could use mold board, SN-1304-054639.
IH 4- bottom plow, big springs, trip beam.
Blanton 9-shank chisel plow, 3-bar, w/gauge wheels, 3-pt.
KMC 10’ field cultivator, double rolling basket, 3-pt.
2-row front mount cultivator for Farmall Super C.
John Deere 6-row no till flex planter, w/fertilizer attachment, trail-type, shed kept, clean.
HAY & LIVESTOCK EQUIPMENT.
(2) John Deere 335 round baler, 4x4 bale, 540 pto, twine tie, light kit, jack stand, only baled grass hay, SN-EOO335X920352.
Vermeer 650F round baler, hydraulic twine tie, 540 pto.
Vermeer 605 round baler, 540 pto, wide belts, hydraulic twine tie, good shape.
John Deere 1219 mower conditioner, 540 pto.
(2) John Deere 1209 mower conditioners, 9’ cut, 540 pto, (1 w/new bearings, gear box rebuilt).
John Deere 275B, 7’ disc mower, used on 200 acres.
John Deere 260, 7’ disc mower, 540 pto, 3-pt.
Kuhn GMC 600 GIIHD disc mower, 7’. 540 pto, 3-pt.
KMC 4755 disc mower carrier.
New Holland 7’ disc mower, 540 pto, 3-pt., shed kept.
Vermeer WR20 8-wheel hydraulic fold finger rake.
(2) John Deere 752 4-basket hay tedder, 540 pto, rear fold, trail-type.
Agco Mdl . 3717 4-basket tedder, hyd. fold.
Sitrex ST520 4-basket hay tedder, 540 pto.
Sitrex 2-basket hay tedder, Mdl. 2GL-302, 540 pto, trail-type.
John Deere side delivery hay rake w/dolly wheel up front, pull type.
John Deere 328 square baler, hydraulic tongue & bale turner to set bales on end for pickup by stack wagon, always sheltered, excellent condition w/manual.
John Deere 14T square hay baler, 540 pto, SN=42137.
Vermeer SW3500 silage or bale wrapper, very good.
NH Mdl . 1890 silage chopper, Cat engine, hydtostat drive, cab, w/3-row narrow head, 2-row wide head & 12’ forage head.
Hydra-Feeder 1200#, hydraulic driven, 3-pt. or will mount on truck bed, like new.
New Holland 1033 stack wagon, SN-10700, picks up 104 bales & stacks, remote 2 nd table & manual.
Fred Cain high lift hay spear, 3-pt.
4-basket hay rake, 3-pt.
Tumble Bug round bale mover, 2” ball.
Vermeer Mdl . 2W hydraulic round bale mover, pull type.
New Holland 520 manure spreader, 540 pto, nice, SN-607651.
Big Valley portable cattle squeeze chute, auto head gate, palpation cage, pin hitch.
Southwest cattle working chute, left hand control, w/carrier & AI cage, like new.
Numerous feed troughs, water tanks.
Cattle corral panels.
(2) Wilson 21’ x 6 ½’ hay feeding trailers, 16” tires, single axle, pin hitch, heavy duty.
24’ x 8’ tandem axle hay trailer, 15” tires, pin hitch.
21’ x 8’ gooseneck hay moving trailer, dual single axle, 11-15SL tires, adjustable gooseneck hitch,
2 5/16” ball.
(5) Rubbermaid 100 gal. water troughs.
Woods 1160 hole digger, 540 pto, w/12 & 8” augers, 3-pt.
Hi-tensile fence wire, Energizers – 110 & Solar.
SPRAYERS & APPLICATORS.
Speed-Spread 6-ton lime/fertilizer mild steel spreader, 540 pto, twin spinners, press wheel, tandem axle, ready for field, shed kept.
Johnson Mdl . S-1000-3, 300 gal. stainless steel tank, 11L-15 tires, manual boom, adjustable wheel spacing.
Reddick 30 gal. sprayer w/3’ boom & hand wand, 3-pt.
Tyler lime/fertilizer spreader, 16” chain, ground driven.
Baltic spin spreader, 540 pto, 3-pt.
EQUIPMENT.
Rome Mdl. 170 hydraulic pan, 17 yd., (6) 13.00-24 TG tires, belly draw bar pull, very good.
John Deere 7’ rotary cutter, 540 pto, 3-pt.
Taylor Way 5’ rotary cutter, 540 pto, 3-pt.
Long 5’ rotary cutter, 540 pto, single sold rubber tailing wheel, needs new sheet metal.
Ford grooming mower, 72” cut.
(3) 48’ semi dry van trailers, tandem axle, swing out rear doors, road ready.
Ranch Hand front bumper replacement for ’99 – ’04 Ford F250, 350, 450, 550.
John Deere 100 lawn tractor, 8 hp B/S 36” mower.
John Deere 45 scraper blade, Cat I for up to 40 hp tractor.
John Deere 12’ drag, 3-sections
John Deere 10’ drag.
MF 8’ road blade.
(2) Dirt blade, 6’, 3-pt.
Dirt scoop, 3-pt.
JD front grill guard, fits 7000 series tractors.
(4) Leona 20” polished aluminum wheels w/30555R20 Nitto Terra Grappler tires, w/less than 5000 miles, 8-lug, last mounted on Chevy. 2500HD.
Troy Belt tiller, 8 hp gas engine.
Woodsman wood cut off saw, 540 pto, w/slide table, 3-pt., (nice).
Sure Weld welder, Mdl. GAMA 33A/BP.
35’ x 22” belt conveyor, hydraulic driven, good for square hay, bulk feed & likes.
Roanoke single axle peanut trailer.
(2) Military tag along trailers, 8x10, lintel hitch.
Fork lift mast , 3-pt.
Agco Cat II fast hitch for tractor.
Fast hitch for 140.
1-pt. hitch for Super A/140 tractors.
Single axle harvester/tri-cycle tractor dolly, 15” tires, pin hitch.
20, 14, 8 & 6’ flattrailers single & tandem axle, some w/sides.
Wood splitter w/gas engine, 2” ball hitch.
Weed eaters.
Back pack blower
Black Max air compressor, 5 hp, 220
Craftsman drill press , belt sander, 12” wood lathe w/bench, planner.
Radial arm saw, wood/metal band saw, Poulan chainsaw.
L-shaped fuel tank w/electric fuel pump.
Porta John on single axle trailer, hand wash tank, 14” tires, pin hitch.
Hardee 16’ tandem axle tilt top trailer.
Lilliston 5’ rotary cutter, 3-pt.
Dr. Fields brush cutter.
Tiger Cub 5’ rotary cutter, 3-pt.
Wyatt spin spreader, 540 pto, 3-pt.
Hardee 6’ rotary cutter, 3-pt.
FRESH CUT LUMBER.
(120) Cedar boards, 1x6, 1x8, 8 & 12’ long
(70) Pine boards, 1 & 2”, 4,6 & 20” wide
Maple chopping block.
(20) Maple boards, 1x8x12
(20) Walnut boards, 1x8x8
(20) Cherry boards, 1x6x8
(60) Oak boards, 1x6 – 10 –16’ long.
COLLECTIBLES.
1955 Chevrolet 5400 1 ½ ton flatbed dump truck, 12 x7 all metal body, 29” wooden sides, single rear grain door, 7.50-20 Budds front, 8.25-20 Budds rear, auxiliary side mount fuel tank, west coast style mirrors, all glass in tack.
1951/52? Chevrolet Loadmaster flatbed dump truck, 1 ½ ton, 6-cyl., 7.00-20 Budds, 12x7 all metal bed, single cylinder, 36” wooden sides, side mount gas tank, 5 glasses – all in tact.
1951 Chevrolet Loadmaster 1 ½ ton dump bed, 6-cyl. Giant Mfg. all metal body – 12’ x 7 ½’, 28” sides, single dup cylinder, 7.50-20 Budds front, 8.25-20 Budds rear, side door windows in metal bands.
1951 Ford F5 flatbed truck, V8, Robinson steel body, Garwood winch, Axl transmission w/ pto on rear, pintel hitch, 36” slat sides, boom brackets on rear, side tool boxes, 7.50-20 Budds front, 8.25-20 Budds rear, front tow hooks, minus door glasses, awaiting a restoration friend.
1935 Chevrolet 1 ½ ton flatbed truck, 6-cyl., 9x8 wooden body, 29” wooden sides, Budd wheels.
1947 Dodge 1 ½ ton flatbed truck, 6-cyl. flathead, 13’ x 7 ½’ metal body, 8.20-20 Budds front, 7.00-20 Budds rear, all glasses in tack.
Special Note: These trucks are awaiting restoration enthusiasts. All would be great projects & items from yesteryear.
Massey Ferguson Super Ninety, SN-W814825, 68 hp 4-cyl. diesel, 4-speed w/hi/lo, live 540 pto, ps, (2) sets dual remote hydraulic outlets, 7/.50-16 front tires, 18.4-30 rear tires, 8810 hrs., all original sheet metal, original paint, on 2 owners, believed to be bought new Aberdeen.
Ford 2000 offset, hydraulic cultivators, 3-pt. hitch, SN-74764, sold new Enfield, NC.
John Deere 520 , SN-5202324, row crop, power steering, fenders, completely restored from transmission forward by Collier Repairs – Four Oaks, NC. A show tractor for sure that runs great. Shipped new to Sevierville, TN 28 th September 1956.
Ford 8N , all original, 4.00-19 front tires, 11.2-28 rear tires.
Ford 900 , ps.
Farmall H w/loader, 3-pt. hitch, good sheet metal.
Farmall 450 w/TA, remotes, 3-pt. hitch, SN-21930.
Allis Chalmers D10 , w/snap coupler hitch, 1400 hrs., all original.
Farmall M , all original, good sheet metal.
Massey Harris 35 combine, 4-cyl. flathead gas, 8’ head, nice, SN-91502908.
New Idea 1-row corn snapper, 540 pto, pull type, good.
(2) New Holland Mdl. 77 hay baler w/Wisconsin motor, always kept under shelter, all original, w/owner’s manual.
New Holland Mdl. 77 hay baler pto driven, always shelter kept, w/owner’s manual.
Auctioneer’s Note:
This sale is like the Washington Monument – always expected to be there. This is just a small sample of what will be @ this sale. If you're interested in a particular item, always call & make sure it did arrive at sale site. Carefully read the note below regarding when equipment will be received at sale site. Call office for commission rates before bringing equipment – this could save you time & money.
Read Carefully !!! Equipment will be received @ sale site week of sale Monday, 21 st April – Wednesday 23 rd April 9:00 AM – 5:00 PM & Thursday, 24 th April 9:00 AM – 12:00 NOON. Bring extra set of keys for vehicles. Items taken on these days only!! Saturday will be for selling only!! Kids need to be under adult supervision at all times.
Selling Schedule: Note the early start. This sale keeps growing each year, so we will change up in ’08. As usual bring a buddy as 2 sales will be running simultaneously – one from each side of the truck. The year we will have an implement row to be sold at the same time tractor row sells. We are planning to have 2 sales from start to finish