JD 8400, 7810, 4440, 2950, 5525, 4030, 2840, JD 2755 w/loader, Case IH 1680,  JD 9600, Barron Bro litter spreader, JD 326 skid steer, like new hopper bottom, 20′ & 16′ gooseneck stock trailers, JD 1950 no till drill

Began: 11/03/18 at 10:00 AM EDT
Location: 2254 NC Hwy. 58, WARRENTON, NC 27589


Saturday 3RD NOVEMBER 10:00 A.M.

WARRENTON, NC  (Inez Community)

 DIRECTIONS: From Warrenton, NC take Hwy 58 south 9 miles, sale on right. From Nashville, NC take Hwy 58 north 26 miles & watch for signs. If you are traveling Hwy 43 @ Grove Hill community watch for auction arrow pointing west. Coming from I-85 in Henderson, take Hwy 39 south thru Henderson, just past Bojangles @ fairgrounds turn left on Vicksboro Rd., go 12 miles to Hwy. 401 & follow detour signs – bridge is out on Lickskillet Rd. so allow yourself a little more time. Watch for signs along the way.

SALE SITE ADDRESS: 2254 Hwy. 58 – Warrenton, NC 27589



John Deere 8400 (has JD 8410 decals) SN-8400P001682, powered by 225 hp 6-cyl. diesel, power shift transmission, 1000 shift-on-the-go pt, (4) sets dual remotes, 20.8R42 duals, 14.9R34 front, 8575 hrs.

John Deere 7810 MFWD, powered by 150 hp 6-cyl. diesel, power quad transmission, 540 & 1000  shift on-the-go pto, (3) sets dual remote outlets, 14.9R30 front tires, 18.R42 rear tires,  8659 hrs., transmission has issues, will not move – maybe something simple.  Update: After speaking withthe previous owner, this was relayed to E.B. – the brake pads are coming off disc, therefore stoppig up the hydraulic screen in the bottom of the transmission, therefore this may be what is affecting the hydrauic system in turn transmission is not work.

John Deere 4030, SN-4330W-008079R, 80 hp,  8-forward, 2-reverse, single rear remote, 4-post canopy, 9424hrs., new front tires.

John Deere 2840, SN-2840-2845B-330510,  80 hp, 6-forward, 3-reverse, hi-low, dual remotes, 18.434 new rear tires, unknown hrs.

John Deere 5525 MFWD, SN-5525-150144, nine forward, 3 reverses, dual rear remotes, cab air, 18.4R30 rear tires, 5629 hrs.

John Deere 2755 MFWD, SN-XL02755F717924X, powered by 76 hp 4-cyl. diesel, standard transmission, (2) sets remotes, 11.2-24 front tires, 16.9-30 rear tires, w/ JD 245 self-leveling loader, w/quick attach 7’ bucket,   5030hrs., w/rebuilt engine?, one family owner.

John Deere 4440, SN-049649R, powered by 130 hp 6-cyl. diesel,  16-speed power shift transmission, 540 & 1000 shift-on-the-go pto, 11:00-16SL: front tires, 18.4-38 rear tires, 9234 hrs., lift assist, long axle, power beyond hydraulic  block.

John Deere 2950, powered by 85 hp  6-cyl. diesel, standard transmission w/shuttle, (2) sets remote hydraulic outlets, 2-post roll guard w/canopy, 10:00-16 front tires, 18.4-38 rear tires, 5640 hrs.

John Deere 5300 w/frontend loader, 6035 hrs., 50 hp.

Ford 5000 standard transmission w/dual power, 540 pto, ps, set remote hydraulic outlets.

Massey Ferguson 135, 3-cyl. gas, been sitting a while, hope to have running sale day.

John Deere 9600 , SN-64129, 4-wheel drive, 6-cyl. diesel, 20.8-38 front duals, 18.4-36 rear, 4943 engine hrs. & 3384 fan hrs., w/Vittetoe chaff spreader.

John Deere 920 grain head, hydraulic forward & reverse,  SN-F641105.

John Deere 643, 6-row corn head, 30” rows.

Case IH 1680, SN-282, IH engine, 30.5L -32 tires, 4950 hrs.

Case 1063, 6-row , 30” corn head, SNJJC0073314.

Case IH 25’ flex grain platform.

Killbros. UT125 header cart.

Unverferth HT25 header cart.

Unverferth 4-wheel wagon header cart.

John Deere 328 skid steer, rubber  tires, 72” loader bucket.

Hyster Mdl. 540XL 4000# forklift(warehouse),LP gas, side shift valve, solid tires, 948 hrs. , SN-A187V07192H.



2007 KW, Cat C13, Fuller 10-speed, wet line, air ride, live tandem, 984,397 miles.

1978 Ford 6-wheel, 2-ton, 330 heavy duty gas engine, 5-speed w/2-speed, 16’ Godwin twin cylinder dump body w/4’ grain racks, rear grain gate w/swing out rear whole gate, new 10:00-20 new rear mud grip tires.

2015 Wilson Mdl. DWH-500 hopper bottom trailer, roll tarp, air ride suspension, aluminum wheels, like new, VIN1W14402A8F2264405.

’01 Hillsboro 20’ combo draft/livestock gooseneck stock trailer, w/heavy duty underside,  rubber floor mats, 20’ x 6 ½’ x7’ tall, full swing half divider w/1/2 slider, escape door, rear gate full swing w/ ½ slider, tandem axles, electric brakes, 16” tires, w/calf box full covered, shed kept, w/battery powered landing gear.

’99 Supreme 16’ x 6’ gooseneck stock trailer, tandem axle, 15” tires, escape door, full swing out rear w/ ½ slider, swinging center divider gate, 2 5/16 ball hitch.

16’x 6’ tandem axle utility trailer, wood floor, 2” ball hitch.

8’ x 5’ all steel utility trailer, single axle, 2” ball hitch, built heavy duty.

’95 Cadillac Fleetwood 182,714 miles, could be a collector’s item.

’95 Ford F150, V8 gas, automatic, long bed, ac, ps.  Note:  this truck was running fine, electrical fire started under the hood.  Shane got it to crank after the fire, starter hung, insurance marked the title total  lose.



Case IH 3950, 21’ 54-blade hydraulic fold disc, 9” spacing.

John Deere 210, 32-blade, 12 ½’ smoothing disc, 9” spacing, trail-type.

John Deere 425, 24-blade offset disc, 11” spacing, trail-type, good.

King 12’ smoothing disc.

6’ disc 3-pt.

(2) 11-shank chisel plow, 3-bar, 30” clearance, swinging steel drag in rear, 3-pt.

IH 155, 4-bottom flip plow, 3-pt.

John Deere 1590, 15’ no-till drill,  hydraulic fold row markers, microband insecticide applicator,  2-pt. hitch.

KMC 6-row strip till, (2) waffle coulters w/single rolling basket,  w/KMC hydraulic  row markers, set on 30” rows, 3-pt.

Marliss 6’ no-till drill, w/small seed attachment, pull type, some rust, food plot special.

John Deere 8300 single disc grain drill, 12’, trail-type.

Cole 2-row planter on cultivator frame, 3-pt., shed kept.

2-row cultivator w/(2) Cole fertilizer attachment on cultivator frame, shed kept.

1-row cultivator, 3-pt.



Kuhn VT144 vertical mixer, 540 pto, pull type, used very little, can call it demo, that’s about it.

John Deere 435 round baler, 540 pto, w/kicker & monitor, shed kept.

New Holland 3`16 square baler, 540 pto, twine tie, shed kept.

New Holland 1412, 9’ disc cutter w/frail blades, 540 pto, trail-type.

New Holland 7’ disc mower, 540 pto, 3-pt.

(2) New Holland 256 hay rake, trail-type.(1 for parts).

8’ frail mower, 3-pt.

4-basket hay tedder, 3-pt.

Befco 10-wheel V rake, (for parts)

3-pt. round bale mover, made to trailer-type.

4-wheel running gear 5th wheel.

Coby 4-wheel wagon 5th wheel.

ForMost manual cattle headgate.

Livestock gates, fence post – steel & wood

(8) 12’, 7-bar, 1 ¾” galvanized cattle corral panels w/pin latch system that’s jimmy proof, easy to hook & unhook, w/extra bar, keep cow form getting her head underneath.

10’ poly cattle feed troughs w/galvanized runners.

4-wheel wagon w/12’ body, 4’ side, dumps, ideal for corn & the likes.



Chandler 20’ litter spreader, all hydraulic, large flotation tires, 30” spinners, excellent, SN-24223.    

Wildkat large capacity front tipping hydraulic litter bucket, quick attach.

Wildkat skid steer loader forks.

Bush Hog 2846QT front end loader, quick attach,  joy stick control, last on Ford 5000.

Brillion 8 ½’ double roller culti-packer on hydraulic  carrier, pull type, nice.

Hardee HS60-60 ditch bank mower,  540 pto, hydraulic slide, 3-pt.,  plumbed for remotes & has valve body.

Rhino DB150 ditch bank cutter, new pump, new motor, new relief valve, SN-12266

Woods 9309, 15’ hydraulic fold bat wing rotary cutter, 540 pto.

John Deere MX6 rotary cutter, 6’, 3-pt., good.

6’ rotary cut ter, 540 pto, 3-pt.

John Blue 300 gal. aluminum tank applicator w/manual folding booms, ground drive John Blue ground driven pump, pull type.

Reddick 300 gal. front mount tank, last on JD 7810.

John Deere gator,  4×2, gas, works daily.

8’ heavy duty blade, 3-pt.

John Deere 6’ blade, 3-pt,.

6’ box blade, 3-pt.

Land Pride 15-48 power seeder, 540 pto, 3-pt., shed kept.

Scottish 8’ pasture drag.

12’ double section drag, 3-pt.

Spin spreader, 3-pt.

John Deere 7000 planter frame cut down to 2-row (parts).

18.4R42 duals last on 7810.

Solar battery fence charger.

Fast fence.

Quick attach bale spear.

Hole digger, 540 pto, 3-pt.

3-pt. boom.

3-pt. dirt scoop.

Approx. 100 gal. fuel tank w/hand pump.

Approx. 200 gal. LP gas tank.

Small steel trailers, pull type.

Paint sprayer for 5 gal. bucket.

4-wheel wagon for tank carrier w/5th wheel steering.

 (2) Wood burning outside heaters, air to air, 4×4 firebox w/heavy large opening door.

Miller Matic 210 mig wire welder.

Puma Industrial twin cylinder portable air compressor, Honda 5.5 engine.

Milwaukee 14” portable chop saw.

Poulan Pro weed eater, heavy string, on wheels, walk behind.

Hydraulic wheel dolly for removing truck wheels for repair.

Wells metal cutting band saw.

Jet metal cutting band saw w/steer frames for both sides of saw.

Campbell Haus electric air compressor (needs a compressor).

Electric bench grinder on stand.

Battery operated golf cart, needs repair.

Shop tools.

(5) 12’x12’x24’ treated timbers.

(7) 12’x12’x12’ treated timbers.

(8) 3’x8’x16’ treated timbers.

(25) 18’, 20’ & 22’ treated poles.

Note:  these are bridge timbers that came off the Lickskillet Rd. bridge last  month.


Auctioneer’s Note:  This auction represents (3) complete dispersals – (1) from Va  & (2) from NC.  This equipment has as you can tell from footnotes various stages from like new to early ages.  Be Here Sale Day & bring your truck & trailer as we would like to load out immediately after sale.

 New Items Added

2001 Valley 16′ gooseneck stock trailer

Terms & Conditions:  All purchases must be paid for sale day. All property sells as is where is with all faults, with absolutely no warranties implied or expressed in any way.  All Serial Numbers, mileage & hrs. unverified. All info printed in brochure is believed to be correct but not guaranteed.  The auction company reserves the right to offer property in separate sales, combinations thereof or as a whole.


WARRENTON, NC  (Inez Community)

 DIRECTIONS: From Warrenton, NC take Hwy 58 south 9 miles, sale on right. From Nashville, NC take Hwy 58 north 26 miles & watch for signs. If you are traveling Hwy 43 @ Grove Hill community watch for auction arrow pointing west. Coming from I-85 in Henderson, take Hwy 39 south thru Henderson, just past Bojangles @ fairgrounds turn left on Vicksboro Rd., go 12 miles to Hwy. 401 & follow detour signs – bridge is out on Lickskillet Rd. so allow yourself a little more time. Watch for signs along the way.

SALE SITE ADDRESS: 2254 Hwy. 58 – Warrenton, NC 27589

Click on any image to view larger.

Click on any image to view larger.

8410 decals – the best we can tell it’s  8400. Just in time for the bean harvest – JD 9600. 328 skid steer – it’ll sell w/regular bucket Powershift & Woods cutter make for good marriage JD 5525 the handy size to have on most any job.
@ press time this 7810 would crank & that is all Could be #1 in corn & beans take home this 2015 Wilson hopper bottom Chandler 20’ spreader - excellent condition 2007 KW
JD 2950 JD 2755 – 5030 hrs. – NH 316. JD gator – ready as a rabbit
25’ header that can shave the ground JD 2840 Rhino DB 150 Kuhn VT 144 - used very little Ford 5000 -loader will be offered separately
JCB – handy as a watch pocket JD 425 offset 30” rows keeps the weeds choked back. 435 bales them the right size – 4x5. JD 920 – more ways to save the crop each day
Has a push button landing gear

Click on any image to view larger.

E. B. Harris Inc. Auctioneers

3200 NC Hwy. 58 WARRENTON, NC 27589

Your auction should be printing now. If not, please click here.