Sam Clapp Est. (dec)

Farm Equipment

IH Case 105C – 4×4, 280 hrs., Case IH 7250 -4×4, IH 706, ’87 IH dsl w/dump, ’03 Ford 250  dsl.,  (2) IH combines, Timber Harvestor band mill, Great Plains 15′ no-till drill, Melroe 230 Spra-Coupe. Case 3309 disc cutter, Vermeer 504 baler, IH grinder/mixer

Began: 06/23/18 at 9:30 AM EDT
Location: 6568 Foster Rd, Whitsett, NC 27377





Directions: I-40/85 travelers, take Exit 138  Gibsonville, Whitsett exit,  travel  Hwy. 61 south 5 mi., turn right on Foster Rd., go 1 mile, sale on left, watch for auction signs.

Sale Site Address:  6568 Foster Rd. – Whitsett, NC  27377

See added updates at bottom of listing


Case 105C 4×4, SN ZDJV50351, powered by 105 hp, 4-cyl. diesel engine, 3-speed left hand shuttle 12-gear transmission, differential lock, ps, 540/1000 shift-on-the-go pto, (2) sets dual remote hydraulic outlets, cab w/air & radio, 11.9R24 front tires, 18.4R34 rear tires, good rubber, 280 hrs., sells with quick attach L630 loader w/bucket, joystick control and buddy seat, like new condition.

Case 7250 Magnum 4×4, SN JJA319, powered by 215 hp, 6-cyl. diesel engine, 4-reverser 18 speed power shift transmission, differential lock, ps, 540/1000 shift-on-the-go pto, (3) sets dual remote hydraulic outlets, cab w/air & radio, 509R30 front tires, 20.8-42 R18 dual rear tires, good rubber,  5805 hrs., full rack of front weights, good condition.

Farmall 706 4×4, SN 41590SY, powered by 96 hp, 6-cyl. turbo diesel engine, 4-speedW/ TA transmission, ps, 540/1000 shift-on-the-go pto, (2) sets dual remote hydraulic outlets, 2-post roll-guard,  10.00-16 front tires, 18.4-38 rear tires, 8531 hrs., has smooth tires, runs good.

IH 674, SN-2430026U102747, powered by 61 hp, 4-cyl. diesel engine, 4-speed Hi-Lo transmission, differential lock, ps, 540/1000 shift-on-the-go pto, (2) sets dual remote hydraulic outlets, 7.50-16 front tires, 18.4-30 rear tires, 3587 hrs., good rubber, good condition.

IH 1566 Turbo, SN 2650125U00710, powered by 161 hp, 6-cyl. diesel engine, 3-speed Hi-Lo transmission, differential lock, ps, 540/1000 shift-on-the-go pto, (2) sets dual remote hydraulic outlets, cab w/air & radio,  11.00-16 front tires, 20.8-38 dual rear tires, front weights, 3450 hrs., shed kept, seems complete – Adam thinks need repair to spines.

Case (looks to be a VAC),SN-05354868, 4-cyl. gas engine, wide front end, to restore.

Farmall Cub w/complete set of cultivators, w/ mid-mount planter, tractor alloriginal.

IH 1460 Axial Flow Combine, 6-cyl. diesel engine, 4075 engine hrs., 28L-26 front tires, 16.9-24 rear tires, 12’ grain head, shed kept.

New pan for IH 12’ header.

IH 715 Corn & Soybean Special, 6-cyl. diesel engine, Hydrostat drive, 3-speed, 23.1-26 front tires, 12.4-16 rear tires, showing  882 hrs.,  12’ grain head, shed kept.

IH 841 4-row corn header

IH grain heads (for parts).

’70 Ford 600 Louisville Line, SN N600VJ40801, 8-cyl. gas engine, 4-speed transmission, 2-speed rear axle, power brakes, 8 track radio, west coast mirrors, 8.25-20 tires on spokes, 17’ twin cylinder dump bed w/ 46” grain sides, 16’ wheel base, showing 93,752 mi., needs tires.

’87 International S1900, 6-cyl. diesel engine, 5-speed transmission, 2-speed rear axle, ps, am-fm radio, west coast mirrors, 11R22.5 tires on Budds, 16’ Johnnie Gregory bed w/4” grain sides (not attached to the truck, sitting on frame, has cylinders), 17’ 2” wheel base, showing 412, 012 mi..

’03 Ford 250 XLT, Powerstroke 6-cyl. diesel engine,w/bonus cab,  automatic transmission, ps, power brakes, am-fm radio, large mirrors, 265/75/16 tires,  gooseneck hitch, 118,936 mi., just had what you call bullet proof work done to engine.

’93 Ford 250 XL, 6-cyl. gas engine, automatic transmission, ps, power brakes, cold air,  am-fm radio, mirrors 16” tires, gooseneck hitch, 136,933 mi., solid runner.

Dodge School Bus,  not running, full of parts.

’76 Mercury Cougar coupe, automatic transmission, 8-cyl. gas engine, not running, good restoration project.

Valley 16’x6’ gooseneck stock trailer, 9.50-16 tires, tandem axle, gooseneck hitch w/ball made on hitch, fair condition.

Texas Bragg 16’ x 7’ equipment trailer,  tandem axle, 16” tires, 205/75R15 tires, bumper hitch, 2” ball, nice.

6’x10’ single axle trailer, 8” sides. 2” ball, 15” tires, fair condition.

6’x8’ livestock trailer, single axle, 5’ sides, 2” ball, 14” tires,  shopmade.



Melroe 230 Spra-Coupe, SN-209011544, 4-cyl. gas, 22’hydraulic fold booms,  Raven controls, foam row makers, 3227 hrs. – Adam says it’s good.

Approx. 6-ton plywood/metal frame fertilizer tender, 8” stainless steel auger, 1-cyl. gas motor w/cover, on tandem axle carrier (could be Agri-Craft).

Speedy Spread 300 gal. aluminum tank, ground driven sprayer, w/Dempster Mdl. SNDL pump, 9’ boom  (tank needs repair)

Sprayer frame hitch, 3-pt.

Berkley pto pump, 5”.                                                          

Gorman pto pump.

Water Winch collapsible hose traveling irrigation w/turbine rewind w/AgRain gun.

Approx. 1200’ 4” Shur Rane pipe.

Approx. 900’, 3”Shur Rane pipe.

(20) Rainbird 30 sprinklers.

Pipe wagon, steel wheels, pull type.

6 ton Tyler Stainless steel spreader, SS floor chain, approx 16” chain, hyd PTO drive for spinners and hyd actuated ground drive wheel, 10.00×20 dual wheels, VG cond.



Case IH 496, 19 ½ ’, 52-blade hydraulic fold disc, 9” spacing, w/rock flex gangs, tandem wheels, trailer-type, good.

Taylor-Way 13’, 28-blade disc, 9” spacing, tandem wheels, w/rock gangs, trailer-type, good.

Great Plains Solid Stand 1500, 15’, (26) double disc, (26) no-till coulters, single press wheels, 7” spacing, w/Mdl. 1595-11 front caddy, center pivot hitch.

Case 5100, 10’ grain drill, (16) double disc, 7” spacing, hydraulic cylinder,  trail-type, 7.50-20 tires.

John Deere 137B drill, 8’ 7” spacing, ground drive, mechanical lift,  ideal for food plots, pull type.

IH Cyclo Air 800, 4-row planter, pull type.

IH 400 , 4-row planter

DMI 500  5-shank ripper, 12’, 30” spacing, 3-pt.

5-shank V ripper, 3-pt.

KMC 30-springshank hydraulic fold cultivator, 3-pt.

4-row cultivator, 3-pt.

IH Mdl. 710 5-bottom plow, semi-mount.

IH 3-bottom plow, 3-pt.

John Deere 3-bottom plow, 3-pt.

2-bottom plow, pull-type.

IH flip plow, 1-pt., rare.

9-tine spring tooth tiller, 3-pt.



Vermeer Mdl. 504G round belt baler, hydraulic string tie, 540 pto.

Case 3309, 9’6” disc haybine, w/side pivot tongue, field ready, shed kept, good, SN-CCB002132.

IH Case 1190, 9’ hay bine, sickle bar cutter,  good, SN-02200274102390.

IH 7’ sickle mower, pto. 3-pt.

New Holland 256 hay rake, ground drive, pull type.

IH 1250 grinder/mixer, solid, shed kept.

IH 425 square baler, good.

Quality Line auger/feed cart.

8’x12’5’ wood gravity grain box, pto auger, on dual wheel single axle, pull type.

Hay spear, mounts on tractor loader bucket.

Cattle feed troughs.

Approx. (25) 4×5 round bales of hay, some under shed,  buyer loads own, bring trailer sale day.

New Idea 40’, 6” grain auger, pto driven.

(8) 14’ steel livestock gates.

12’ livestock gates.

Cattle corral panels, easy hook up pin latch system.

Poly bull proof mineral feeders.

(12) Ideal galvanized farrowing  crates.

Round hog feeders, need some repair.

(2) Chore Time approx. 4-ton free standing feed tanks, nice.

(2) Apppox. 6-ton, 3-ring free standing feed tanks w/augers.

Quick attach bale spear, last on L630 loader.

(70) Steel fence post.



Timber Harvester 30HT25 portable band mill w/gas LX 990 Linamar engine, 596 hrs., hydraulic log lift and log turner, may need fuel pump.

Bush Hog 2400QT front loader w/mounts, w/grapple bucket, last on 674..

John Deere 1508 hydraulic fold bat wing rotary cutter, 540 pto.

Bush Hog 9-shank soil saver, pull type.

Rhino 7’ scrape blade, 3-pt. 

5’ rotary cutter, 540 pto, 3-pt.

A-T- Ferrell clipper grain & seed clearner.

500 gal. fuel tank on skids w/Gasboy electric pump.

275 gal. fuel tank w/12-volt pump on single axle trailer 2” ball, nice.

3-pt. spin spreader.

Wood splitter, remote hydraulic, 3-pt.

4-wheel flat bed wagon.

Generac 540 pto driven generator, pull type.

Side mount tractor tanks.

Steel wheel 1-row subsoiler, pull type.

Stalk chopper, 3-pt.

JD Mdl. E steel wheel manure spreader.

Belt driven wood saw.

Single axle tobacco trailers.

(8) IH center wheel weights.

IH front weight bracket & assorted weights, some w/Logo.

Huskee 22-ton log splitter, gas engine, pull type.

Suzuki Quad Runner  4×4, 4-wheeler, 877mi., needs work.

Kawasaki 220 Bayou 4-wheeler, needs work to run.

Several JD lawn tractors (for parts).

6’ yard rake, 3-pt. 

6’ box blade,3-pt.

1-row middle buster,  3-pt.

Pallet of IH Hyd/Transmission oil (1 gallon size).



Manter 40 ton shop press.

Craftsman radial arm saw.

Dewalt chop saw.


Roto tiller.

(2) Double grinders.

(2) Metal bandsaws.

(2) Belt sanders.

Gray Mills parts washer.

Dynamometer, pto drive, on trailer.

5 ½ hp gas Honda air compressor.

Engine stand.

Assorted jacks

Assortment hydraulic cylinders.

Nuts & bolts.

Migmaster 250 Plus wire welder, good.

220 P & H AC-DC arc welder/generator.

Lincoln 225 welder.

Super 200 steam jenny.

Cant hooks, valve grinder

Bench vise.

Hand power tools.

Acetylene torches.

Wernner fiberglass step ladder.



Blacksmith Bellows , approx. 28” x40″, oval shaped.

Walking steel & wood beam plows/ cultivators.

Fairbanks Morse No. 1 feed mill, looks good.

1-row steel wheel cultivator, horse drawn.

Single axle lawn trailer.

Steel hand crank churn.

Iron & wooden beds.

Old glass jars.

Stoneware crocks & jugs

Fairbanks Morse gristmill

Old toys.

Ohio No. 11 corn shredder, looks good.

(2) Hand crank corn shellers.

Advertising tins & boxes.

Woven seat chairs.

(2) Sausage grinders

Hand planters & tools.

Cradle  scythes

Belt driven feed hammer mill w/bagger hopper.


Ingeco 3 hp hit & miss engine, looks complete, shed kept (may be on a cart).

Primitive wood  & stainless buckets.

Old kitchen range stove.

Assorted lumber – 2” & 1” thick- various lengths.

Hoosier cabinet.

30 gal. cast iron stew pot.

55 gal. wooden barrel,  ideal for wine.

Tobacco baskets.

Enterprise hand crank meat grinder.

Small platform scale.

Crosscut saws.

JD steel wheel sickle mower.

Oliver wood seed box.

(2) Gulf 30 gal. barrels.

(6) Esso quart cans.

(2) Porcelain  double sided signs advertising Quaker State oil and A good Place,

(2) 50 gal.  tin barrels full of feed an seed sacks,

Coca Cola 20 gal. wood barrel keg.

Maytag 1-cyl gas motor.

Metal butter churns.

Cloth sacks.

Collector’s Note:  barns & shed are full of furniture & farm equipment of yesteryears.  There appears to be 5+ generations,  chair collection – one of which is 1800’s Johnson style child’s high chair & the list will grow as items are taken out & gotten ready for sale.  Most of these items  will sell in the shade in the early afternoon after the larger farm equipment so bring your water cooler & dress appropriately to stay cool.



1947 Oliver 70 Industrial Tractor, rebuilt motor, new clutch, only 1600 total made.

Gallion 503 motor road grader with 10 ‘ blade w/hydraulic turn table 6-cyl. IH diesel engine, tires, fair to good, runs, nice!
Melroe 3430 Spra-Coupe, 4 cylinder Pheuget diesel engine, 300 gall tank, 60′ booms, with joystick control, triple nozzle bodies and foam markers, cold AC, timing belts have been changed in engine, @3000 hrs, clean machine from flat country Kansas state.

Tyler LF6 lime/ fertilizer spreader wagon, hydraulic drive, pull type, dual wheels, single axle, will haul 8 tons of lime,  nice.

NH double hay rake hitch w/hydrualic remote swing 
NH 258 side hay rake 
JD 4×2 Gator ATV gas engine with windshield, canopy, manual bed dump
All the above is nice, feild ready condition.


Pile that include –fencing, pipe, manure spreader, pull type combine, combine heads,  Hyster 30 forklift, round bale feeders, fuel tanks, rolling spiders, steel I beams just to mention a few items.


Additional quality non-conflicting absolute consignments accepted .


For more info contact Eli Detweiler – Sales Manager – 336-848-8165.


Auctioneer’s Note;  Samuel farmed @ family farm raising grain & livestock & was a  mechanic that did mechanic work for the area farmers there n the farm.  With all this in mind it’s easy to see he always kept his equipment well maintained & serviced.  Be Here Sale Day – bring your trucks & trailers & take home equipment to work on your family farms.



  Check out the web for updates & photos for more items we find when getting this sale ready


Lunch will available from Brick Reformed Church.  Proceeds from refreshment booth go to youth activities & new building fund.


Payment in full day or sale – Cash or check.  No credit cards

Terms & Conditions:  All purchases must be paid for sale day. All property sells as is where is with all faults, with absolutely no warranties implied or expressed in any way.  All Serial Numbers, mileage & hrs. unverified. All info printed in brochure is believed to be correct but not guaranteed.  The auction company reserves the right to offer property in separate sales, combinations thereof or as a whole.



Directions: I-40/85 travelers, take Exit 138  Gibsonville, Whitsett exit,  travel  Hwy. 61 south 5 mi., turn right on Foster Rd., go 1 mile, sale on left, watch for auction signs.

Sale Site Address:  6568 Foster Rd. – Whitsett, NC  27377

Click on any image to view larger.

Click on any image to view larger.

– Only 280 hrs. on this 105C this 7250 has been thru the Chesapeake Bay bridge 2 Spra-Coupe. 3227 hrs. Farmall  706 - built to last just about forever. Ford Powerstroke
Great Plains no-till DMI 5-shank, 30” rippers Bush Hog builds them tuff Vermeer 504G will roll it. have to continue to mount this bed to make it work
Rock gangs - always a good option to have

Click on any image to view larger.

Click on any image to view larger.

Click on any image to view larger.

Click on any image to view larger.

Click on any image to view larger.

Click on any image to view larger.

E. B. Harris Inc. Auctioneers

3200 NC Hwy. 58 WARRENTON, NC 27589

Your auction should be printing now. If not, please click here.