Annual Warren County Cow Pasture Equipment Auction

Farm Equipment


JD, MF, Ford tractors, dump trucks & trailers, equipment and gooseneck stock trls., ’15 Tahoe, lots of hay & livestock related equiment.

LIVE ON-SITE AUCTION
Began: 05/05/18 at 9:00 AM EDT
Location: 2254 NC Hwy. 58, WARRENTON, NC 27589

Annual Warren County Cow Pasture Equipment Auction

Saturday 5h May  @ 9:00 A.M.

WARRENTON, NC  (Inez Community)

 DIRECTIONS: From Warrenton, NC take Hwy 58 south 9 miles, sale on right. From Nashville, NC take Hwy 58 north 26 miles & watch for signs. If you are traveling Hwy 43 @ Grove Hill community watch for auction arrow pointing west. Coming from I-85 in Henderson, take Hwy 39 south thru Henderson, just past Bojangles @ fairgrounds turn left on Vicksboro Rd., go 12 miles to Hwy. 401, straight across on Lickskillet Rd. for approx. 12 miles to Pete Harris Rd., straight across, sale site 1 mile on right. Watch for signs along the way.

SALE SITE ADDRESS: 2254 Hwy. 58 – Warrenton, NC 27589

 

TRACTORS, COMBINES, FORKLIFTS, TRUCKS, VEHICLES, TRAILERS, LAWNMOWER.


John Deere 7810, 6281 hrs., last known piece of equipment coming from Dale Bone Est. (dec)

John Deere 4240, cab, quad range transmission, (2) sets dual remotes, 14L-16SL front tires, 18.4-438 rear tires, good tires, 7122 hrs.

John Deere 4450, 4×4, power shift, cab, 1-owner.

John Deere 2240, SN-429905, powered by hp 3-cyl. diesel, standard transmission, set dual remote hydraulic outlets, 540 pto, 7.50-16 front tires, 14.9028 spin out rear tires, 3132 hrs., 1-owner.

Massey Ferguson 471, 72 hp, diesel, set remote outlets, 2-post roll guard w/canopy, always kept inside building, front weights, 870 hrs., 1-owner.

International 1486, cab, cold air, super clean, 3500 hrs., 2-owner tractor.

Ford 6610, SN-C680453, powered by hp 4-cyl. diesel, standard transmission, 540 pto, 10:00-16 front tires, 18.4-34 spin out, set dual remotes, less than 200 hrs. on engine, paint faded, very solid.

Ford 3910, diesel, ps, set dual remotes, 4270 hrs.

Long 2260, diesel

(2) Farmall 140 (one w/recent paint) w/cultivators.

John Deere 6620 Titan II combine, 4×4, w/JD 915 grain head, straw shredder, SN-H0660X618315, always shed kept, bought new to Warren County. 

Gleaner R50, 4×4.

Nissan 90 dual solid wheel forklift, 10,000#.

Toyota dual pneumatic wheel forklift, 6000#.

‘07 Mack Vision road tractor, 450 hp, 6-cyl. Mack, 10-speed, live tandem, wet line, ¼ fenders, aluminum headache rack, step tool boxes, air bag suspension, 22.5Budds, sliding 5th wheel, 359,785 miles.

’15 Chevrolet Tahoe LT, 4×4, loaded, 93K miles, 1-owner, very nice.

‘11 Dodge Ram 5500, 4×4, 4-door, 6.7 Cummins, 6-speed transmission w/South Bend clutch, 19.5 steel Budds, w/Brandford Built 9’ steel flatbed w/underneath mount tool boxes, gooseneck ball hitch, RanchHand front bumper, 133,000 miles.

 ‘89 Ford 10-wheeler dump truck, Cat 6-cyl. diesel, 10-speed transmission, 22.5Budds, Ox 17’ contractor’s  body w/3-way tailgate, Hendrickson walking beam suspension, electric roll tarp, 419K miles.

‘97 FordF350, 7.3L Powerstroke turbo disel,4×4, dual rear wheels, automatic, w/Deweze 480 balebed w/electric/hydraulic powered with a corded remote, bed has recessed gooseneck hitch, (2) underneath tool boxes, used daily to feed cows, truck has been serviced regularly, 155K miles.

‘84 Ford 800, V8 gas, 5-speed w/2-speed, air brakes, 10:00-20 Spokes front, 11R24.5 Spokes rear, 15’ steel flatbed, ?21,529? miles showing.

‘80 Chevrolet 60 14’ twin cylinder dump w/grain sides, w/rear grain gate.

’99 Ford F350 w/Reading service body, 5.4 gas engine, automatic.

1970”s GMC 6500, V8 gas, 5-speed w/2-speed, 9:00-20 Spokes, big block, truck is rough.

’04 Ford F150, 4×4, 5.4 Triton, extended cab, transmission rebuilt in 6-2017, 140,789 miles.

’01 Ford F350 Super Duty dually, 4-speed, diesel, automatic.

’03 Dodge 1500 4×4 pickup, V8 gas engine, 17” tires, below eye line mirrors, 197,096 mi., farm brusies.

’03  Chevrolet dually, diesel, clean (needs engine work)

’94 Chevrolet 1500, extended cab, 4×4, a/c, ps, automatic, 5.70 engine, needs wiring harness, dog box & pack of hounds.

‘13 PJ 32’x102” gooseneck flatbed, dual tandem, 16” tires, 2-speed landing gear, electric/hydraulic brakes, underneath side mount tool boxes, 5’ monster ramps, nice.

‘03 Feree LTV-35 lowboy trailer, 51’x102”, hydraulic detachable neck non ground bearing, w/hydraulic beaver tail, 22.5 steel Budds, folding outriggers, (12) pair D ring tie downs, plumbed for hydraulic winch, boom trough, 15’8” tail, 24” belly, 10’ neck, 8” headboard on neck, runs off of wet line.

’92 East 42 x 102 frameless aluminumdump trailer, 60” sides, good tarp,  22.5 polished aluminum Budds, air bag, 2-way tailgate w/grain door,  vibrator.

’01 Fruehauf  48’ x 102, step deckspread axle flatbed semi-trailer.

’95 Landoll 50’ step deck trailer, 36’ deck, 14’ over king pins, 19.5 Spoke tires, close tandem.

’86 Fruehauf 4800 gal. stainless tell pressurerized tanker, tandem axle, ideal for nitrogen & water, when pressurized it will unload in a jiffy it you would like to use as such.

’86 Fruehauf 28’ semi-van trailer, single axle, 11R24.5 Budds, roll up door.

’78 Great Dane 45’x96 semi-van trailer, roll up rear door, curb side door, good dry trailer.

Great Dane 48’x102” semi-van trailer, sliding tandem axle w/24.5 Budds, swing out rear doors.

’91 McElrath 25’ x 8’ gooseneck flatbed trailer, 20’ flat deck w/5’dove tail, loading ramps, 2 5/16 ball hitch, could use floor shortly.

20’x7’ equipment trailer, heavy duty, tandem axle, folding loading ramps, ball hitch, heavy duty landing gear.

Superior 6 ½’ x16’ tandem axle flatbed trailer, loading ramps, 14” tires, 2 5/16 ball hitch.

‘88 Hazelwood 14’ gooseneck stock trailer, tandem axle, electric brakes, full swing out rear gate w/ ½ slider.

‘86 Supreme 4-horse, slant load gooseneck trailer.

’80 Gore 16’ stock trailer, new pressure treated floor, plywood lined kick plate, full swinging divider gate, full swing out rear w/ ½ slider, 2 5/16 ball hitch, electric brakes, fiberglass top.

Woods F222K zero turn lawn mower, Kawasaki F5651V gas engine, 54” deck, electric/hydraulic raise & lower, 2-post folding roll bar, nice.

Frontier GM2072R estate mower, 6’, 540 pto, 3-pt.

2015 Gator 850I RSX, factory bumper, winch, windshield, top, LED light bar, 75 hrs.

 

HAY, GRAIN & LIVESTOCK EQUIPMENT.

John Deere 3970 forage harvester w/iron guard w/Kernel processor, 1000 pto, hydraulic spout control sells w/JD 3-row, 30” row head, w/monitor.

John Deere 3970 forage harvester, 3-row, 30”, 1000 pto, w/monitor box.

John Deere 7’ pickup head, last on JD 3970.

Richardson 700 silage dump wagon, 10.00-20 tires, dual rears, nice wagon, always under cover.

New Holland 853 round baler w/bale wrapper.

New Idea 4854 round baler, like new.

Deutz 250 round hay baler, 540 pto.

New Holland 565 square hay baler, 540 pto, shed kept.

New Holland 311 square hay baler, 540 pto, nice.

New Holland 311 square hay baler, 540 pto, twine tie, 1-owner, good condition.

New Holland 315 square baler.

New Holland 1409 discbine conditioner, w/rollers, always shed kept, like new.

Kuhn FC 283TC 9’ discbine, 540 pto, impellor conditioner, 2-pt hitch, good.

Hesston 9’ disc cutter, 540 pto, 3-pt.

New Holland 471 mower/conditioner, 540 pto.

Krone KW 5.52/4x7T 4-basket hay tedder,  hydraulic fold & tilt, 540 pto, pull-type, nice, been used less than 400 acres.

Hodge/Bilt 8-finger wheel V rake, pull type, good.

Hoelscher 1000 square bale hay feeder, 540 pto, nice.

Hoelscher 100 square bale grapple forks, skid steer amounts.

John Deere 74 bale squeezer, 3-pt.

Stur-D portable cattle working chute w/automatic headgate, w/squeeze, palpation cage, rolling back gate, adjustable 12’ alley, 16’ tub w/crowding gate, removable wheels, good.

Powder River automatic cattle headgate.

ForMost 450 cattle working chute w/preg checking cage, manual headgate, breast bar, head extensions, portable.

(2) Priefert cattle working chutes w/manual headgate, (1) w/wheels, (1) w/preg checking cage.

Powder River cattle chute w/manual headgate, almost new.

(18) Rohn 2” galvanized cattle corral panels.

(2) Rohn 8’ walk thru bow gates.

Behlen 750# poly creep feeder w/galvanized creep gate.

Tandem axle hay feeding trailer, 21.5L-16 tires, heavy duty.

26’ hay/silage feeding trailer, tandem axle, 15” tires, rear gate will swing open to load, pin hitch.

(2) 26’ x 8’ hay/silage feeding trailers, single axle 10.00-20 tires, pintle hitch.

Approx. 20’ metal feed/water trough for cattle, on single axle, Derrill Edwards built.

2-ton round hog feeder.

4-hole galvanized hog feeder.

(5) Purina poly cattlelick tanks, 2-wheels per tank.

(18) 16’ cattle corral panels w/easy hook up jimmy proof latching system.

(6) 10’ poly feed troughs on galvanized runners.

(6) 30’ cattle black poly feed troughs on wheels.

10’ x 6’ cattle feed trailer, tandem axle.

Mira-Found 4-ball cattle waterer.

Taylor 40’ cotton wagon, tandem front & rear axle, middle side panel taken out to load square bales of hay.

‘15 Kuhn Easy Spread 1230 manure spreader, like new, been used (3) times.

IH 103 manure spreader, 540 pto, pin hitch, ideal for horse barn.

Farm King #360 grain cleaner w/6” auger.

Hi-tensile wire spinning jenny.

Hi-tensile wire.

T post driver.

(4) 4×16 concrete hog slats.

 

TILLAGE & PLANTING EQUIPMENT.

John Deere 225, offset disc, 24-blade.

12 ½’ 44-blade disc, 7” spacing, tandem wheel, pull type.

Long 10’ leveling disc, pull type.

King 6’ disc, 3-pt.

14’field cultivator w/double rolling baskets, 3-pt. (built very similar to KMC).

Brillion 13’ double culti-packer w/seed hopper.

Brillion 10’ double roller culti-packer w/Gandy 10’ hydraulic control seed box, 3-pt., always shed kept.

Kewanee 13’ culti-mulcher.

10’ double roller culti-packer, pull type.

Yetter Systems One Seed Vet II seed blower system powered by B&S 11 hp engine.

John Deere 750, 10’ no-till grain drill, pull type, shed kept.

John Deere B grain drill, 8’, mechanical lift, pull type, ideal for food plots.

Bushog/Lilliston 9690 no-till drill, 10’, w/small seed box attachment.

Cole 4-row no-till planter, set on 36” rows, 3-pt.

8’, 7-tine chisel plow.

2-row rigid shank cultivator, 3-pt.

(2) Sets W & A double disc bedders, 4×7 mounts.

(2) KMC ripper shanks w/4×7 mounts.

Hardee 5′ disc
(2)  Gandy boxes
John Deere bedder row markers, last on JD 7000.

 

SPRAYERS & APPLICATORS.

Reddick 1000 gal. black poly nurse tank on tandem axle carrier w/torsion axles, 16”tires, Honda engine, pin hitch, nice, kept inside.

Reddick 300 gal. sprayer, 46’ booms, Raven spray control & Richway Trac Master 2000 foam marker.

5000 gal. poly upright tank.

1550 gal. white poly flat bottom nurse tank.

Millcreek 50TD mini-spreader, 540 pto, poly floor, pin hitch.

Poly 400#  capacity spin spreader, 540 pto, 3-pt., excellent.

 

IRRIGATION & TOBACCO EQUIPMENT.

Marlow 540 pto pump, 4×4.

Approx. 1000’ Wade Rain 4” pipe.

(2) Nelson big irrigationguns.

(11) 80B sprinklers.

Assortment irrigation fittings.

(2) Taylor tobacco balers. 

MISC. EQUIPMENT

KBH 4-row picker boll buggy.

Hardee 7’ rotary cutter, 540 pto, 3-pt., nice.

Long 6’ rotary cutter, 540 pto, 3-pt.

5’ estate mower, belly mount.

Hardee 5′ rotary cutters. 

King Kutter 4’ rotary cutter, 540 pto, 3-pt.

King Kutter 6’ road blade, heavy duty. 3-pt.

Worksaver 6’ box blade.

6’ blade, 3-pt.

Frontier 5’ blade, 3-pt.

6’ landscaping rake, 3-pt.

6’ box blade, 3-pt.

5’ box blade, 3-pt.

Tufline 5’ atv lawn rake, 1 7/8” ball.

Swisher 60” lawn mower w/B&S engine, pull type,.

Hinimoto 5’ rotary tiller, 540 pto, 3-pt.

Klassen TS-20 self-propelled turf seeder powered by 5 ½ hp Honda engine.

Kasco Plotter’s Choice 4’ row planter drill w/extra seed drop tubes, 3-pt.

Dunham Lehr 22 front end loader, independent valve body, 5’ bucket, last on JD 2240.

Set of loader forks, – last on Dunham Lehr loader.

4’ scoop/bucket, 3-pt.

(2) Cole planters 12MX-Multi-flex mounted on 80” tool bar, has fertilizer hoppers & extra plates, set up for 36” corn, 3-pt.

2-row rigid shank cultivator, 3-pt., w/extra points.

Valley grill guard bumper w/2” receiver, fits 2000 GMC pickup.

Sea-Doo XP Bombardier jet ski,  w/single axle trailer, 2” ball hitch.

Cummins 6-cyl diesel w/generator attached mounted on tandem carrier, very low hrs.

Dayton generator, 540 pto, on trailer

Kobalt 60 gal. upright air compressor, 220, works the way it should.

Approx. 280 gal. fuel tank w/hand pump.

Approx. 250 gal. fuel tan w/electric pump, good.

Approx. 200 gal. oval fuel tank w/manual pump.

Approx.  75 gal. round fuel tank w/manual pump.

1000 gal. fuel tank

(4) Solid rubber tires mounted on steel 12-hole rims, last on rubber tire loader, work ideal in a recycle yard.

Atlas metal lathe, 36”table, 110 electric motor.

14.5 tires, new, on rims.

(6) Ford front suitcase weights.

3-section, 10’ folding drag harrow.

4-section pasture drag.

2-section drag harrow, 3-pt.

(3) Cast iron stew pots 27 ¾ x 17, 23 ½ x 15 ½, 16 ½ x 12.

(3) Antique wood fireplace mantels, complete, could be 1800’s.

Stainless steel milk can, approx. 10 gal.

27” wide, 49” long, 6” deep, 4-burner cooker on stand, gas fired, divided in half, ideal for fish, built right.

TIMBER.

Pine – (20) 1x6x16, (20) 1x6x12, (20) 2x4x14, (20) 2x6x12 (20) 2x6x16, (20) 2x4x16

Cedar –  (20) 1x6x8, (20) 1x8x8,   

Walnut – (20) 1x6x8,  (20) 1x8x8,

Oak – (20) 1x6x16, (20) 1x6x12

Cedar & walnut boards, 2” x 20

Mantels – 4” thick, cedar & walnut 10’.

Cedar porch swing, swing w/legs, glider, small , medium & large picnic tables, benches.

 ADDITIONS

 Farm Pro 4×4, 25 hp tractor

Farmall M

’00 Chevroelt Silverado, 4×4, 4-door, gas, automatic, gooseneck ball, needs engine.

’90 GMc Z71 pickup

’74  Ford 2 ton dump, 2-owner.

JD 920 Grain header, great shape , can hook up and go to the field.

’99 Chevrolet school bus.

JD 7000, 4-row no till planter, row markers, pull type.

New Idea 1-row corn snapper, 540 pto, works good.

Dewalt 10” radial arm saw.

Delta dust collection system.

1 1/2 hp Emglo air compressor

Airless paint sprayer

8” tile saw w/stand

14’ aluminum walk plank.

1 pr ladder jacks.

Freud biscuit joiner

Makita electric plane.

7” Skil worm drive circular saw.

Qwik set door jig.

Porter cble ruter ¼ – ½ shaft w/plunge base.

Wing template.

First up 10×10 gazbo.

Dovetail jig.

Shaper panel cutter bit.

Craftsman scroll jig saw.

(3) Antique molding planes.

Router mult form cutter.

Set forsner bits.

Set plug cutter bits.

(2)  Extension ladders.

Craftsman transit level w/tripod+story pole.

Set snow chains – 14, 15,16″

Stanley hinge template.

2001 F-350 SD, 2WD, 4DR AND MILEAGE 305,808 

 

 

 

Auctioneer’s Note:  This is just a small sample of what will be @ this sale.   There will be 2 complete dispersals of livestock equipment in this auction. Check website for updates,  Remember – If you are interested in a particular item, always call & make sure it did arrive at sale site!! Some items may not make it to sale site.  Carefully read the note below regarding when equipment will be received at sale site.  Call office for commission rates before bringing equipment – this could save you time & make you $$$$.. Check web often week of sale for updated equipment & photos.

Read Carefully !!!  Equipment will be received @ sale site week of sale Monday, 30th April – Wednesday 2nd  May  9:00 AM – 5:00 PM & Thursday, 3rd  May  9:00 AM – 12:00 NOON. Bring extra set of keys for vehicles. Items taken on these days only!! Friday will be for getting items in sale order & Saturday will be for selling only!!   Kids need to be under adult supervision at all times.

Selling  Schedule:  Note the early start – 9:00 AM.  As usual bring a buddy as 2 sales will be running simultaneously – one from each side of the truck.  This year we will have an implement row to be sold at the same time tractor row sells.  We are planning to have 2 sales from start to finish & maybe 3 sales part of the time. 

 

Bring trucks & trailers – we will have (6) loaders & operators working sale day.  We will be glad to assist you on sale day getting loaded.

Terms & Conditions:  All purchases must be paid for sale day. All property sells as is where is with all faults, with absolutely no warranties implied or expressed in any way.  All Serial Numbers, mileage & hrs. unverified. All info printed in brochure is believed to be correct but not guaranteed.  The auction company reserves the right to offer property in separate sales, combinations thereof or as a whole.

The steak wagon that follows the auction truck will be here & the sandwich wagon also.

Read Carefully !!!  Equipment will be received @ sale site week of sale Monday, 30th April – Wednesday 2nd  May  9:00 AM – 5:00 PM & Thursday, 3rd  May  9:00 AM – 12:00 NOON. Bring extra set of keys for vehicles. Items taken on these days only!! Friday will be for getting items in sale order & Saturday will be for selling only!!   Kids need to be under adult supervision at all times.

Selling  Schedule:  Note the early start – 9:00 AM.  As usual bring a buddy as 2 sales will be running simultaneously – one from each side of the truck.  This year we will have an implement row to be sold at the same time tractor row sells.  We are planning to have 2 sales from start to finish & maybe 3 sales part of the time. 

 

Bring trucks & trailers – we will have (6) loaders & operators working sale day.  We will be glad to assist you on sale day getting loaded.

Terms & Conditions:  All purchases must be paid for sale day. All property sells as is where is with all faults, with absolutely no warranties implied or expressed in any way.  All Serial Numbers, mileage & hrs. unverified. All info printed in brochure is believed to be correct but not guaranteed.  The auction company reserves the right to offer property in separate sales, combinations thereof or as a whole.

WARRENTON, NC  (Inez Community)

 DIRECTIONS: From Warrenton, NC take Hwy 58 south 9 miles, sale on right. From Nashville, NC take Hwy 58 north 26 miles & watch for signs. If you are traveling Hwy 43 @ Grove Hill community watch for auction arrow pointing west. Coming from I-85 in Henderson, take Hwy 39 south thru Henderson, just past Bojangles @ fairgrounds turn left on Vicksboro Rd., go 12 miles to Hwy. 401, straight across on Lickskillet Rd. for approx. 12 miles to Pete Harris Rd., straight across, sale site 1 mile on right. Watch for signs along the way.

SALE SITE ADDRESS: 2254 Hwy. 58 – Warrenton, NC 27589

Click on any image to view larger.

Click on any image to view larger.

'15 Chevrolet Tahoe LT - 93K miles JD 4240 (2) of these choppers -both shed kept Make boys into men & no gym equipment needed A dump box  that’s been kept under cover
3910 built w/long lasting service  in mind. '13 PJ 32' flatbed trailer Have a Kuhn laying the crop on the ground Still has new smell
Cattle will handle smooth in this chute. 1-owner JD 2240 '03 Feree 35-ton - still has lots of work to do '07 Mack Vision road tractor '15 Gator 850i RSX 0 75 hrs.
-U-don't have to be pretty to work - 6610 42' frameless dump 6620 Titan II - w/grain head MF 471 - sharp - think you are @ the new store. '89 Ford 10-wheeler w/contractor's dump
Reddick nurse tank - used very little NH 1409 when _ U- want the job done right Woods zero turn mower, 54" deck. 7.3 diesel w/Deweze bale handler JD 4450 - will last indetinitly
IH 1486  & cool a/c in cab See-Doo XP

Click on any image to view larger.

Click on any image to view larger.

Click on any image to view larger.

Click on any image to view larger.

Click on any image to view larger.

E. B. Harris Inc. Auctioneers

http://ebharris.com

3200 NC Hwy. 58 WARRENTON, NC 27589

Your auction should be printing now. If not, please click here.

AuctionServices