TAP Construction

CONSTRUCTION EQUIPMENT AUCTION


(2) JD 200D LD excavators, JD 650H LGP, JD 650J LGP, Super Pac 6620 vibatory roller, Galion motorgrader, Dresser FS211 paddle pan,(5) dump trucks,  (3) road tractors, 40-ton lowboy, (2) steel dump trailers.

LIVE ON-SITE AUCTION
Began: 03/17/18 at 10:00 AM EDT
Location: 1055 Lassiter Rd., Four Oaks, NC 27524

CONSTRUCTION EQUIPMENT AUCTION

TAP CONSTRUCTION

SATURDAY, 17TH MARCH 2018 – 10:00 AM

FOUR OAKS, NC

 

Directions: Hwy 210 & 70 in Smithfield take 210 west for 6.2 mi., turn left on Lassiter Pond Rd., travel 1.4 mi. to stop sign, turn right on Lassiter Rd., go 3 mi., sale on right across from Four Oaks Fire Department Station 2.  Watch for auction signs along the way.

Sale Site Address: Across from 1055 Lassiter Rd. Four Oaks, NC 27524

EXCAVATORS, BULLDOZERS, MOTORGRADER, PAN, ROLLER

’11 John Deere 200D LC hydraulic excavator, SN XJBD512710, 6-cyl. diesel engine, 32” pads, plumbed with auxiliary hydraulic that will the timber tamer manual thumb, 42” bucket adjustable , steel bumpers/walk boards down both sides, 5270 hrs..

John Deere 200C LC hydraulic excavator, SN X507716, 6-cyl. diesel engine, 32” pads, manual thumb, 42” bucket, steel bumpers/walk boards down both sides, 7414 hrs..

John Deere 650H LGP bulldozer, SN-X896788, 9 ½’ 6-way hydraulic blade, 24” pads, new rollers, pins, bushing, sprockets, rails, forestry package, 8241 hrs.

John Deere 650J LGP bulldozer, SN-X107671, 10 ½’ 6-way blade, 28” pads, forestry package, 2575 hrs.

Galion T500L motor grader, SN-TCO51A-1, leaning wheel, IH 6-cyl. diesel engine, 14.00-24 tires, 13’ moldboard front rippers, tandem rear, cab, 6377 hrs.

Dresser FS211 11 YD. hydraulic paddle pan, SN 5670701U00771, IH 6-cyl. diesel engine.

Super Pac 6620 vibratory roller, SN-101961, Cummins 3.9L 4-cyl. diesel, hydrostatic drive, 66” drum, 685 hrs.

 

TRUCKS & TRAILERS

’90 Mack CH613 road tractor, Mack EM7-300 diesel engine, 9-speed transmission, air brakes, west coast mirrors, 22.5 Budds, 63 gal. dual aluminum tanks, 188” wheel base, 574,000 mi., Reyco suspension, single line wet line, live tandem.

’85 Kenworth W900 day cab road tractor, Cat 3406 diesel engine, 9-speed transmission, air brakes, west coast mirrors, 24.5 aluminum Budds, sliding 5th wheel, 677,275 mi., Reyco suspension, aluminum half fenders, aluminum head ache rack, live tandem.

’94 KW T800 tandem dump truck, 330 hp Cummins L10 diesel engine, 9-speed transmission, air brakes, west coast mirrors, 22.5 Budds, 17’ steel dump body w/54” sides, 014967 mi., Hendrickson walking beam suspension, 2-way tail gate.

’93 Kenworth T800 tandem dump truck, Cummins N14 diesel engine, 9-speed transmission, air brakes, west coast mirrors, 22.5 Budds,  17’ Ox body w/54” sides, 228” wheel base, 826,608 mi., Hendrickson walking beam suspension, 2-way tailgate.

‘88 Peterbilt 378 tandem dump truck, Cummins 350 diesel engine, 9-speed transmission, air brakes, west coast mirrors, 22.5 & 24.5 rear Budds, 17’ steel dump body w/54” sides, 377,559 mi., Hendrickson walking beam suspension, 2-way tail gate.

‘87 Ford CL9000 cab over road tractor, Cummins 350 diesel engine, 9-speed transmission, air brakes, west coast mirrors, 22.5 Budds, 75 gal. dual fuel tanks, sliding 5th wheel, 154” wheel base 130,982 mi., single line wet line, live tandem.

’86 Mack R6865T tandem dump truck, Mack 300 diesel engine, duplex transmission, air brakes, west coast mirrors, 22.5 Budds, 80 gal. dual fuel tanks, 16’ steel dump body w/64” sides, 186” wheel base, 431,388 mi., 2-way tailgate.

’71 Brockway road tractor, Cummins 270 diesel engine, 10-speed transmission, air brakes, west coast mirrors, 22.5 Spokes, sliding 5th wheel, walking beam suspension, been sitting a while, ready for restoring.

’83 Ford F Series, 8-cyl. gas engine, 4-speed transmission, west coast mirrors, 9.00R20 Spokes, Progress 1400 gal. tanker body, 20,689 mi., been used as a water truck.

R/S 30’ x 96” steel dump trailer, tandem axle, 64” sides, 24.5 Budds, roll tarp, 2-way tailgate.

’74 ITI 22’ x 8’ steel dump trailer, tandem axle, 60” sides, 24.5 Spokes, poly liner, 2-way tailgate.

’76 Hyster 33’ x 8’ 40-ton lowboy trailer, tri axle, 10.00R20 tires, loading ramps, folding out riggers.

Dorsey 41’ double bunk log trailer, tandem axle, 22.5 Spokes, steel headache rack.

’77 Demco 24’ x 8’ all steel flatbed trailer, tandem axle, pintle hitch, 8.25R15 tires, 6’ loading ramps, air brakes.

’76 42’ van trailer w/side door, tandem axle, (former reefer)

 

 

EQUIPMENT

Timber Tamer HD 60 bush & tree cutter, hydraulic driven, mounts on 200D excavator.

9 ½’ pin on root rake, last on 650H.

10 ½’ pin on root rake, last on 650J.

Wakco 9’ sheep foot double roller, pull type, good.

Taylor-Way Mdl. 200247, 27-blade 12’ offset/new ground disc, trial-type.

10 ½’ front & rear spacing, tandem wheel, good.

Transmission jack.

Motor stand.

Tandem wheel tine jack.

Pumps, Mud Hog & Trash.

Pipe fittings.

Hand tools.

Hydraulic shop press.

Rolls drain tile pipe, 6” & 4”.

Logs – tobacco barns – taken down.

Steel T-posts, used for silt fence.

Steel (flat, round, I-beam, angle) various lengths & sizes.

Cummins 400 engine, needs work.

Concrete driveway pipe.

V-ditch bucket, 36” on bottom, 109” on top.

Trenching bucket, 16”.

Stump burner, pto.

Rotating lasers & bulls eye grade detector.

 14.5 new tires, mounted on rims.

12′ livestock gates.

Other absolute non-conflicting consignments accepted.

ADDITIONS NOT LISTED IN BROCHURE

John Deere 1020 = one owner

John Deere 2550, 5101 hrs.,  – one owner

Tarter cattle working chute – new in 2016

Tarter cattle alley way – new in 2016

Tarter cattle crowding tub – new in 2016

Honeycutt gooseneck flatbed trailer w/remoceable sides

16′ gooseneck stock trailer

Lely 500# spin spreader, 540 pto, 3-pt.

John Deere 3-bottom plow, 3-pt.

500 gal. poly tank

John Deere 14T square hay baler

New Holland 615 disc mower, used very little, 540 pto, 3-pt.

 

 

Auctioneers Note: Terry Parker Sr. (TAP) has been in heavy construction business for 21 years and is retiring on doctor’s advice due to back issues. 

For more info call Terry @ 919-291-2279.

Terms & Conditions:  All purchases must be paid for sale day. All property sells as is where is with all faults, with absolutely no warranties implied or expressed in any way.  All Serial Numbers, mileage & hrs. unverified. All info printed in brochure is believed to be correct but not guaranteed.  The auction company reserves the right to offer property in separate sales, combinations thereof or as a whole.

 

Click on any image to view larger.

Click on any image to view larger.

200 goes where the work is. -  This 200 is plumbed to run a cutter head. Built to move the big loads. Peterbilt will take it to bank. Graders like this don't come by every day.
this is a sweet handling 650J. long rod on the blade helps fine tune the grading job – JD 650H The road less traveled just got better. W900 & 3 axle lowboy. – Super Pac 6620 with only 685 hrs.
Roll on w/a hi cubic 10-wheel dump Here’s a dump that will last –U- a long time. –U- thought there were no more chassis dumps. Don’t lighten up – tighten up w/a KW dump This Sheep foot roller has on hardened feet.
New ground or job site – get it done with ease w/a Taylor-Way.

Click on any image to view larger.

Click on any image to view larger.

E. B. Harris Inc. Auctioneers

http://ebharris.com

3200 NC Hwy. 58 WARRENTON, NC 27589

Your auction should be printing now. If not, please click here.

AuctionServices