Jerry Keck

FARM EQUIPMENT


JD 6320, Case IH 7110, 7130, JD 1070,Farmall 706,  IH 140, JD 9500, Cat D7E, 40′ dump trl., dump trucks, irrigation equipment, Spray Coupe 3630,JD 750 grain drill, grain bins & augers, Cammond 12′ blade, shop items

LIVE ON-SITE AUCTION
Began: 02/10/18 at 10:00 AM EST
Location: 1320 County Line Rd, Gibsonville, NC 27249

FARM EQUIPMENT AUCTION

JERRY KECK

SATURDAY, 10TH February, 2018 – 10:00 AM

GIBSONVILLE, NC

Directions: From Reidsville approximately 10 mi. south on Hwy 87 or approx 15 mi. north of Burlington on Hwy 87 to County Line Rd – East on County Line Rd 2 mi. sale site on left.

Sale Site Address: 1320 County Line Rd. – Gibsonville, NC 27249

TRACTORS, FORKLIFT, COMBINE, BULLDOZER, TRUCKS & TRAILER

John Deere 6320 4×4, SN L06320H439409, powered by 85 hp, 4-cyl. diesel engine, 16-speed power shift transmission, differential lock, ps, 540/1000 shift-on-the-go pto, (2) sets dual remote hydraulic outlets, cab w/air & radio, 14.9R42 front tires, 18.4R34rear tires, 2560 hrs.  good rubber, always serviced, 1-owner, field ready condition.

John Deere 1070 4×4, SN M01070A001454, powered by 35 hp, 4-cyl. diesel engine, 3-speed hi-lo transmission, differential lock, ps, 540 shift-on-the-go pto,  set  dual remote hydraulic outlets, 2-post roll guard, 8.16-R1 front tires, 13.6-28 rear tires, , 2699 hrs. , new rubber, sells with JD 80 quick attach loader w/bucket w/joystick control, good condition.

Case International 7130 Magnum, SN JA0035822, powered by 180 hp, 6-cyl. diesel engine, 18-speed power shift transmission w/4-speed reverse, differential lock, ps, 1000 shift-on-the-go pto, (3) sets dual remote hydraulic outlets, cab w/air & radio, 16.5L-16.1 front tires, 20.8R42 dual rear tires, front weights, 3991 hrs.  good rubber, always serviced, 1-owner bought new in 1990, field ready condition.

Case International 7110 Magnum, SN JJA0006572, powered by 125 hp, 6-cyl. diesel engine, 18-speed power shift transmission w/4-speed reverse, differential lock, ps,540/1000 shift-on-the-go pto, (3) sets dual remote hydraulic outlets, cab w/air & radio, 14L-16.1 front tires, 20.8R38 dual rear tires, front weights, showing 1123 hrs., hour meter was replaced approx 2500 hrs.  good rubber, always serviced, bought new in 1989, field ready condition.

Farmall McCormick 706, powered by 75 hp, 6-cyl. diesel engine, 4-speed hi-lo torque transmission, ps, 540/1000 shift-on-the-go pto, (2) sets dual remote hydraulic outlets,  6.50-16 front tires, 16.9-38 rear tires, front weights, unknown hrs.  good rubber, has tricycle front end, new injectors, new head, rebuilt injection pump, good condition.

Single front wheel to fit 706.

Set of 16.9-34 tires and hubs to fit 706. 

International 140, SN 56572JKK, powered by 21 hp, 4-cyl. gas engine, 4-speed transmission, 540 pto, cultivators, fast hitch, 5.00 155L-4 front tires, 12.4-24 rear tires, unknown hrs.  good rubber,  good condition.

Farmall 100, SN-5984J, powered by 18 hp, 4-cyl. gas engine, 4-speed transmission, 540 pto, cultivators, fast hitch, 5.00-16 front tires, 12.4-24 rear tires, unknown hrs.  fair rubber,  less than 10 hrs. on rebuilt engine, good condition, good rubber.

Lift Master Forklift, SN 171380, 28’ mast, 4-cyl. diesel engine, 2-speed hi-lo transmission,16.9-24 front tires, 245/75R16 rear tires, all terrain forklift with hydraulic side shift,4600# lift, good rubber, good condition.

John Deere 9500, 6-cyl. diesel engine, SN H09500X665369, Vittetoe dual chaff spreader combine, 4660 engine hrs. , 3334 separator hrs., has Maurer bin extension, , well maintained, shed kept, field ready machine, Nice!

John Deere 925 grain flex head, SN H00925F673380.

John Deere 920 grain flex head, SN H00920F636046.

Alliance head carrier cart, SN D44230115.

Knowles running gear made into header cart.

Cat D7E bulldozer, SN48A3160, powered by 6-cyl. Cat engine, 22” wide tracks, 10’ 5” wide blade, good running machine, electric start, 3-speed power shift transmission, could use new rails shortly.

Cat 613B paddle dirt pan, showing 1584 hrs., SN 38W5375, 3208 Cat engine, good running.

Cat 613B paddle dirt pan, 3208 Cat engine, runs,  Jerry has taken some parts off to run other machine.

‘99 International dump truck, SN 4900DT466E, VIN 1HTSDAAN4XH628845, 6-cyl. diesel engine, Allison automatic 6-speed transmission, cab lights, ps, air brakes, am-fm radio, West Coast mirrors,11R22.5 tires on Spokes, 12’ single cylinder dump bed w/42” grain sides, 153,621 mi., comes with Rock sides, super clean & nice!

’98 GMC C7500, VIN 1GDM7H1M5WJ515720, 8-cyl. gas engine, manual 5-speed transmission, 2-speed rear axle, cab lights, ps, air brakes, am-fm radio, West Coast mirrors, 11R22.5 tires on Budds, 16’ twin cylinder dump body w/45” grain sides, rollover tarp, 139,279 mi., Super Nice!

’85 Ford 700, VIN 1FDPK74N3FVA17020, 8-cyl. diesel engine, 5-speed transmission, 2-speed rear axle, cab lights, ps, power brakes, am-fm radio, West Coast mirrors, 10R20 front tires, 9.00-20 rear tires on Spokes, 14’ dump body w/48” grain sides, rollover tarp, 236,846 mi., Nice!

2000 Freightliner 60 series, SN 1FUPFSEB1YLB99178, Detroit 6-cyl. diesel engine, 10-speed transmission, cab lights, ps, am-fm radio, West Coast mirrors, 285/24.5 tires on aluminum Budds, 200 gal. fuel capacity, 5th wheel, tandem axle, 567,038 mi., day cab w/wet line, dual chrome exhaust, chrome tire shields, front bumper and visor, tires 50%, good runner.

’71 Chevrolet C50, SN CE531P104418, 8-cyl. gas engine, 4-speed transmission, 2-speed rear axle, cab lights, ps, am-fm radio, West Coast mirrors, 8.25R20 tires on Budds, 12’ flatbed, showing 62,877 mi., solid truck.

’97 Raven 40’ x 96” aluminum dump trailer, VIN 1R1D14024VJ097095, 11R24 tires on Budds, 8.25 x 24.35 rims, tandem spread axle, w/lift front axle lift, Surelock rollover tarp good condition.

’13 PJ 26’ x 102” w/5’ beaver tail gooseneck trailer, w/ramps, 7-prong plug,2 5/16 hitch, tandem axle, 14,000 GVW, used very little.

 

IRRIGATION EQUIPMENT

John Deere 6-cyl. power unit w/6×4 Berkley irrigation pump, belt driven w/clutch assembly.

Akron 4” x 20’ approx 2200’.

(2) Irrigation pipe trailers.

(8) Nelson 150 irrigation guns on stands.

(6) Rainbird 80E sprinklers.

Assortment of valves, T’s, plugs, fittings, ect.

Berkley 4” x 3” pump.

Berkley 6” x 4” pump.

TILLAGE EQUIPMENT

John Deere 210 16’ disc, 40-blade, 9” spacing front & rear, tandem wheels, traile type, SN 027322A.

INT 10’ soil saver, 9-shank, 14 culter blades, hydraulic lift, trail type.

Pittsburgh 5-shank spring tooth  tiller, 3-pt. hitch, 4’ wide, made to fit 5th row tobacco.

Pittsburgh 10-shank spring tooth tiller, 3-pt..

Blanton 3-shank plow middle buster.

(2) John Deere cultivator, rear shanks off 140.

(2) Scratchers off 140.

SPRAYERS

Spray Coupe 3630,  5-speed manual transmission, 400 gal. tank, 60’ booms, straight line guidance system, 440 controller, 4141 hrs., foam row markers, shed kept, radio, ac/heat, field ready.

Complete rear end only off Spray Coupe, 60’ wide booms.

Metal Equipment Co. 6000 aluminum nitrogen vertical storage tank.

Stainless steel 650 gal. nurse tank w/gas engine and pump on single axle trailer, pin hitch.

Stainless steel 1000 gal. nurse tank w/chemical inductor, 5.5 hp Briggs & Stratton engine & pump.

Lely 500# spin spreader, 3-pt.,  SN 9020977.

EZ Flow 8’ lime spreader, pull type, SN 70544.

(2) 55 gal. sprayer tank, 3-pt.

HAY & GRAIN EQUIPMENT

John Deere 750, 15’ no-till grain drill, set on 7 ½”, 24-drops, hydraulic fold row markers, dual front dolly  wheels, SN N00750X008645, Remlinger 6” loading auger w/hydraulic remote drive.

Case IH 8520 in line square baler, SN CFH0018781, field ready, shed kept.

Pequea 10-wheel rake, center kicker wheel, shed kept, used 5 seasons, very good condition, field ready

Gravity grain box on Kasten model 83 running gear, SN 8731.

J & M gravity grain box on EMCO running gear.

Westfield 8” x 51’ pto drive grain auger w/hitch and hopper.

Brock approx. 8000 bu. grain bin w/roof vents, sweep, new in 2003.

Long 7000 bu. grain bin w/sweep.

Long 3200 bu. grain bin w/sweep.

Brock 24” aeration fan, 115V w/transition.

Long 24” grain aeration fan, 115V w/transition.

Hutchinson 6” x 16’ grain unloader auger, 5hp electric.

6” x 6’ upright unloading auger w/5 hp electric motor.

Long 24” grain fan, electric motor, needs repair.

Comet portable 5” grain dryer, 110V.

Grain bin floor.

 

EQUIPMENT

Quickie X51 quick attach front loader w/bucket, SN 1404129874.

Set loader forks to fit Quickie loader.

Cammond Mdl. AP12, 12’ box blade, scraper leveler,  w/hydraulic tilt, pull type, like new, SN 05140914.

John Deere 1518, hydraulic batwing fold 15’ rotary cutter.

4’ x 8’ wood trailer, single axle, pin hitch, 15” tires, bill of sale only.

38’ x 9’ mobile home frame, 3-axle, 2-5/16 ball hitch, 8-14.5 tires, hay trailer, fair condition, no title.

Hardee 14’ x 8’ steel tilt trailer, dual axle, 9” metal sides, pin hitch, 7.00-15 tires, good condition, has title.

GE 1000 gal. steel fuel tank w/115V Tuthill electric pump.

250 Gal. fuel transport tank on single axle pin hitch trailer, 12V Tuthill transfer pump.

MP 5hp electric transfer pump w/switch box.

(2) ¾” x 20’ long tow cables w/large hooks.

PTO 1000 drive sprayer pump.

(6) 27.75×8.75-14.5 tires.

Several 20’ x 20’ tarp covers.

Tractor drawbar.

(4) 5 hp electric motors off of Powell bulk barns.

6” x 6’ left hand auger, new in box

(2) 10R22.5 tires on 10-hole rims.

Set 13.6-28 tires on JD 8-hole 12 rims.

(42) pieces of 10’ x 42” insulated metal siding.

Hay spear, fits 1070 JD tractor loader.

Misc tires and rims.

Approx. (40) 4” x 8’ treated posts.

Approx (50) new 5” x 15” cement blocks.

260  gal. tank.

Misc pallet shelfing.

Commercial duty 5hp 24 ton vertical wood splitter.

Airco Hornet special, 4-cyl. gas welder on single axle trailer, 200 amp, 2” ball hitch, 3” x 1 ½” steel tubing, 40 pieces +/-.

Fork lift 42” forks.

Parts washer.

8 hp gas Briggs & Stratton leaf blower.

New V-belts.

Several coolers.

Old apple cider press, looks like ready to work.

Large assortment of wrenches, sockets, drill bits, pipe wrenches, pliers, hydraulic jacks, electric drills and grinders, chains and binders, new filters, ect.

SHOP EQUIPMENT

Atlas 4-speed 4’ metal lathe.

Nitrogen applicator pump, piston drive

Central pneumatic air drill, 1” drive impact gun.

Speedway drill press with vise and adjustable table.

1 ¾” drive air impact gun.

Blacksmith large anvil.

Hand tobacco setters.

Dvorak Iron Worker Mdl. 1791, SN 311973, 220 Electric, breaks up ½” steel, cuts angle steel and punches holes, with dies for hole size punch on steel caster wheels, every shop can use one.

Johnson Mdl.  J, serial J-15523, 4-speed ¾ hp band saw, 24” cutting table.

Miller Matic 200 wire welder, 220 V with aluminum kit.

Fornney  acetylene torch kit with cart, minus tanks.

Manitowoc 600 lb ice maker upright.

Escell 13 hp Honda gas 3600 PSI pressure washer.

Fat Mdl.25F20E electric pressure washer.

Sears Craftsman 10” radial arm saw.

Remington 2-cycle pole saw.

Bins of parts (sprayer, baler, tedder ext.).

(2) Hydraulic floor jacks.

Hand saws, levels, clamps, step ladders.

5-speed small drill press.

Coleman Power House 5000, 10 hp generator,

Full set of cylinder bars w/bolts for 9500 JD combine.

New parts for Cat machine.

 

Auctioneers Note: After 40 plus years of successful farming Jerry and wife Kathy Beck will be retiring. Make plans to be here auction day and bid your price on well maintained, shed kept, field ready equipment and high quality shop items!

 Lunch will be served by Thompson Baptist Church.

 

EQUIPMENT FROM ANOTHER FARMER – will be moved to Jerry’s sale.

Case 140A, 4×4, SN-CFO295M, powered by 140 hp, 8-speed w/hi-lo standard transmission, shuttle forward /reverse, (4) sets dual remote hydraulic outlets, 14.9-28 front tires, 18.4-38 rear tires, rear wheel weights, front weight, 959 hrs.

(2) Farmall IH 140 w/cultivator, rear wheel weights, (1) has fertilizer drive, nice.

’95 Chevrolet Kodiak, 5-speed w/2-speed, single axle, GFE stainless steel spreader truck, w/Centervine GPS, roll over tarp, 092025 mile.

John Deere 210, 44-blade leveling harrow, 7” spacing, dual 15” wheels, pull-type.

Perfect 13”, 24-shank field cultivator w/rolling baskets.

John Deere 11-shank chisel plow, 10’, 3-pt.

John Deere 12’, ‘, 25-spring shank cultivator, 3-pt.

W & A 4-row bedder w/row markers, 3-pt.

Sovema 7’ rotary tiller, 3-pt.

Woods 6’ rotary cutter, 3-pt.

Woods 6’ finishing mower, 3-pt.

Spider High 2-row cultivator w/spray rig.

Taylor Way 7’ scraper blade, 3-pt.

Woods 7’ scraper blade, 3-pt.

Bush Hog 7’ scraper blade.

Hardee 7’ box blade, 3-pt.

Blanton 10’ x 4” square tool bar.

Holland 2-row Mechanical 5000 tobacco carousel planter w/water tank, 3-pt.

Sheppard “Bale Rite” tobacco baler w/Rice Lake 480 Legend Series scales, on pin hitch trailer.

Burroughs 4-row, 200 gal. sprayer, single boom, 3-pt.

6’ roto tiller,3-pt.

IH 8-cyl. propane gas, 4” irrigation pump.

Berkely 4×5 irrigation pump,

(10) 10’ x 5’ single axle tobacco box trailers.

14’x6’ dual axle trailer, 14.5 tires, 2” ball hitch, fold down ramps.

12’ x 6’ single axle trailer, 14.5 tires, pin hitch.

’76 14’, tri-axle trailer, 3’ beavertail, fold down ramps, 2 5/16 ball hitch, bumper hitch.

Lilliston 2-row rolling cultivator w/ground driven fertilizer attachment, 3-pt.

KMC 2-row rolling cultivator w/hydraulic driven fertilizer attachment, 3-pt.

Hardee sprayer, 3-pt.

1100 gal. poly tank.

Snyder 200 gal. side saddle tanks w/bracket.

2-row rolling cultivator 3-pt.

John Deere 7’ quick attach frontend loader bucket.

(12) Powell barns, all single phase, (2) 12-box DeCloet Maximiser, (1) 10-box – DeCloet, (1) 10 ½ box – DeCloet,, (2) 126-rack – Wayne heat exchanger, (2) 150-rack – (1) Midco – (1) Wayne heat exchangers, (4) 150-rack – (2) DeCloet (2)Wayne heat exchangers

These barns are located @ 645 Troublesome Rd. – Reidsville, NC   27320  – View prior to sale – Will sell from 1320 County Line Rd. – Gibsonville, NC 27249

 ADDITIONS:

 ‘97 Nissan pickup, 4-cyl. gas, manual 5-speed, 205/75 R 14 tires, with toolbox, 184,940 mi., runs good, needs muffler.

Athens 14’, 32-blade disc, tandem, w/hydraulic lift wheels, pull type.

Crustbuster Mdl. 4615 sod drill, 24 drops,  7.5” spacing, rubber V closing wheels, on front dual tandem 11L-15 tires, with 200 gal. liquid fertilizer tank applicator, 3966 acres on the meter, very good condition.

Kinze 3000 6-row planter, w/hydraulic row markers, Keeton seed firmers, 200 gal. liquid fertilizer applicator tank, & 300 gal. on liquid nitrogen tank, set on 30”  rows , used for corn planting, good.

(2) Powell 1-row tobacco strippers with stalk choppers, hydraulic remote drives, pull-type, field ready.

Pittsburgh 14’, 19-spring shank tiller cultivator, 3-pt.

‘72 F600 w/14’ Miller dump bed w/42” grain sides, V-8 Gas, 4-speed transmission, w/2-speed rear end. 

I &J 15.5’ cover crop roller/packer, w/hydraulic wheel lift, pull-type,  2017 model, used on 125 acres, new!

Perfecta II 26’ hydraulic fold field cultivator, w/rear smoothing spikes & rolling baskets. 

Amadas Reel Rain Mdl. A103 irrigation reel, 5” hose, Nelson 150 gun. 

Decloet 1-row tobacco stripper, with hydraulic pto pump drive, used very little,  original paint,  always shed kept.

Soilmover 3 1/2 yd. dirt pan, hyd. wheel lift, pull-type.

New Idea 803C w/868 Uni-System silage cutter, 4×4, 200 hp, hydrostatic 4 speed drive, 6-cyl. Cummings diesel engine, w/wind row pickup head, 3504 hours ?


DMI 900 Ecolo-Champ 900, 14’, (10) front dics blades, (4) chisel plow shanks, (5) ripper shanks, (8) bedder disc on rear, pull-type, nice.


John Deere 210 disc harrow. 14’, pull type.

Mack B62, runs great, turbo charger whistles a sweet tune, if someone is looking for a truck to restore here you go, bill of sale only.

 

Terms & Conditions:  All purchases must be paid for sale day. All property sells as is where is with all faults, with absolutely no warranties implied or expressed in any way.  All Serial Numbers, mileage & hrs. unverified. All info printed in brochure is believed to be correct but not guaranteed.  The auction company reserves the right to offer property in separate sales, combinations thereof or as a whole.

 

 

 

 Payment in full day of sale – Cash or Check.  We do not accept credit cards.

Terms & Conditions:  All purchases must be paid for sale day. All property sells as is where is with all faults, with absolutely no warranties implied or expressed in any way.  All Serial Numbers, mileage & hrs. unverified. All info printed in brochure is believed to be correct but not guaranteed.  The auction company reserves the right to offer property in separate sales, combinations thereof or as a whole.

GIBSONVILLE, NC

Directions: From Reidsville approximately 10 mi. south on Hwy 87 or approx 15 mi. north of Burlington on Hwy 87 to County Line Rd – East on County Line Rd 2 mi. sale site on left.

Sale Site Address: 1320 County Line Rd. – Gibsonville, NC 27249

Click on any image to view larger.

Click on any image to view larger.

Cut a pretty wide swath w/9500 & it’s right Cut a pretty wide swath w/9500 & it’s right Run rings around the others w/a tri-cycle 706. Spray Coupe – make the best even better Tomorrow starts here w/a 7130
U’re in line w/a case IH 8520 square baler. – Case IH 140A – sure fire power. More to power to you w/a Cat D7 Blows the doors off the completion – Speedy Spread – View the barns @ 645 Troublesome Rd. – Reidsville, NC   27320
Value is what –U- get w/Cat paddle pan. grain storage & handling equipment 7110 – the reliable red power. Built strong to last long – 4600# Liftmaster. (3) as nice grain dumps as –U- can drive
Save your tires –this one has a lift axle. – Water ways or building sites, they will be plum – ’92 Freightliner w/Detroit

Click on any image to view larger.

Click on any image to view larger.

Here's a b61 that runs great if someone is looking forward a truck to restore here you go bill of sale only

E. B. Harris Inc. Auctioneers

http://ebharris.com

3200 NC Hwy. 58 WARRENTON, NC 27589

Your auction should be printing now. If not, please click here.

AuctionServices