Farm & Livestock Equipment

JD 2350, Ford 6610 Series 2, Ford 3600 Indistrial, ’02 Ford Lariat, “90 Mercedes, ’82 Barrett 16′ alum. stock trl., Delta 20′ gooseneck flatbed trl., JD 535 baler, Vicon disc mower, Haybuster 10′ no-till drill, livestock equipment, JD 325 skid steer, 

Began: 09/30/17 at 10:00 AM EDT
Location: 3064 Old 75 Hwy, STEM, NC 27581

 & Others


Directions:  Being on I-85 north of Durham and south of Oxford, take exit 191 (Butner/Creedmoor Exit) to Hwy 56.  Turn West on Hwy 56, go ½ mile and turn right on 33rdstreet.  Travel 2 miles, turn right on Old 75 Hwy.  Travel 1.2 miles, sale site will be on right.  Watch for auction signs. (Google Maps users – list address as Butner)  

2nd Parking Note for trucks & trailers:  If you are coming from Butner, go past the main parking entrance a couple hundred yards, there will be parking sign indicating to the right.  This will carry you back to one of Jim’s cow pasture.  Plenty of parking on back side of sale site.

Sale site address:  3064 Old 75 Hwy – Stem, NC 27581


John Deere 2350, SN-474800, powered by 55 hp 4-cyl. diesel, standard transmission, 540 shift-on-the-go pto, (1) set dual remote hyd. outlets, 16” front tires, 16.9-28 rear tires, 4889 hrs.

Ford 6610 Series 2, SN-BC58207, powered by 72 hp 4-cyl. diesel, standard transmission, 540 shift-on-the-go pto, (2) sets dual remote hyd. outlets, 2-post roll-guard, 7.50-16 front tires, 18.4-30 rear tires, 1219 hrs.

Ford 3600 Industrial, SN-C297433, powered by 40 hp 3-cyl. gas, standard transmission, 540 shift-on-the-go pto, 4-post roll-guard, 16” front tires, 14.9-24 dual rear tires, w/front end loader 5 ½’ bucket, 2791 hrs.

Note:  Jim is the 2nd owner of the above listed tractors.  He can give you hrs. on each tractor when he bought from the first owner & told us that the hrs. showing are correct.

Ford (appears to be a Golden Jubilee), 4-cyl. gas, standard transmission, 5.50-16 front tires, 11.2-28 rear tires, (missing SN).

*John Deere 325 skid steer, PIN-T00325A, w/4’ John Deere adjustable loader forks, 12.5-16 excellent tires, rear weights, 1072 hrs., appears to be in excellent condition.

*Komatsu D65 EX-12 bulldozer, SN-60845, canopy, hydraulic front blade w/angle, draw bar  Note:  this machine cranks, move, & this what we have been told that may need to be done: needs fuel cable, (we have new that goes with machine), shifter cable, (you can manually shift it now), tracks need adjusting. 

’02 Ford F250 Lariat 4×4, 7.3 Powerstroke diesel, extended cab, automatic transmission, 16” tires, leather interior, w/gooseneck ball hitch, 65,570 miles, shed kept.

’90 Mercedes Benz 350 SD, Turbo diesel, automatic, leather interior, bucket seats, sun roof, 15” tires, 224,954 miles, clean building kept.

Kawasaki Mule 3010 UTV, 4×4, 933 hrs.



’82 Barrett 16’ x 7’ aluminum gooseneck stock trailer, full swing out rear w/ ½ slide, full swinging center divide w/ ¾ swing, front divide gate to make 4’ section for calves, right hand side escape door, tandem axle, 16” tires, electric brakes, 2 5/16” ball hitch. 

*’91 Sooner 20’ aluminum stock trailer, electric brakes, tandem axle, right hand escape door, full covered nose w/right hand door to nose, full swing out rear w/½ slider, 2 5/16 ball hitch, has removable deck boards, can double deck shoats, goats, lambs, & calves.

’05 Delta 20’ x 8’4” gooseneck flatbed trailer, tandem axle, 2 5/16” ball hitch, 16” tires, w/4’ pop-up dove tail and 4 ½’ load ramps, dual landing gears.

Tow Rite 12’ x 7’ gooseneck dump trailer, tandem axle, 20” extension sides, 2 5/16” ball hitch, w/electric hyd. dump.

Hardee 16’ flatbed trailer, tilt top, tandem axle, pin hitch, 15” tires.

5’ x 8’ single axle trailer, 20” sides, 2” ball hitch, 14” tires.



John Deere 535 round baler, net wrap, gathering wheels, 540 pto,  Jim bought this baler new, nice baler for the age.

Vicon DMP2800 disc mower, 9’ cut, 540 pto, 3-pt.

KMC 4755  disc mower caddy cart.

John Deere 702 8-wheel hay rake, w/center kicker wheel, hydraulic fold, pull-type.

New Holland 256 Rolabar hay rake, dolly front wheels, nice.

Morra 4-basket hay tedder, manual fold, 540 pto, pull-type.

Haybuster 107 10’ no-till drill, 18-drop, 7 ½” spacing, pull-type, planted 598 acres.

Killbros 350  gravity flow wagon, 5th wheel steer, 15” tires.

Radson model 300 grain moisture tester.

C&B galvanized sweep pen w/10’ alley w/sliding gate, heavy duty, nice.

Cattle working chute w/Priefert Model #91 auto./manual head gate, w/swing out sides, palpation cage, built right.

Apache approx. 150 bu. calf creep feeder, w/spring loaded creep gates, pull-type, like new, no salt ever.

Applegate 1000# single sided calf creep feeder, poly bottom, creep gates, very good condition.

(2) Galvanized creep feeders, 1-single sided w/ gates, 1-double sided w/out gates.

(2) Poly round bale feeders, comes w/7 yr. warranty.

Approx. (20) cast iron bath tubs used for feed troughs.

Approx. (10) poly feed bunks w/galv. runners.

Water tanks, various sizes, some w/automatic float.

Ton of cattle mixing salt.

Behlen 2-hole automatic waterer.

Cryenco 450  semen tank.

Calf puller, the kind that walks the calf out.

Individual young bull feeder, for hard working young bulls.

Bull proof mineral feeders.

Poly wind vane mineral feeders.

Several round bale feeding rings.

Stacks of livestock gates and corral panels.

IH 5000-B fence charger, charges 100 miles of fence, new.

(2) IH Super 98 fence chargers.

Clipper No. 9 belt lacer.

Wire un-roller, pto driven.

Rolls of poly fence wire.

Step-in post.

Vinyl T-post.

Wire stretchers.

SS milk can.

Cattle working supplies.

Hay rake teeth and parts.



Danuser post hole digger, 12” auger, 540 pto, 3-pt.

Bush Hog 3210 10’ rotary cutter, 540 pto, pull-type, good.

John Deere 506 5’ rotary cutter, 540 pto, 3-pt.

John Deere 225? 7’ offset disc, 18-blade, 9” spacing, very good harrow, may need blades before long.

Bush-N-Bog 5’disc, 3-pt.

Alexander 6’ disc, 3-pt.

8’ double roller culti-packer, 3-pt.

5-shank spring tooth tiller, 3-pt. (Jim thinks he may find some more shanks).

4-wheel wagon w/12’ wooden flatbed, 4’ sides, good.

16’ 4-wheel wagon, 5th wheel steer.

4-wheel wagon running gear, looks like a former NH silage wagon.

GL2P220 inch hyd. angle front push blade, w/skid steer hook up, brand new still in the crate.

Bale spear for front end loader, last on Ford loader.

John Deere thick suitcase weights.

Bale spear, 3-pt.

5’ box blade, 3-pt.

6’ blade, 3-pt.

1-row subsoiler, 3-pt.

Cosmo 500 spin spreader, 540 pto, 3-pt.

10’ spike drag harrow, 3-pt.

Heavy duty Scottish pasture drag w/spikes on one side & smooth on the other side.

Augers, 8” and 10”, will fit Danuser.

John Deere single axle yard cart.

(10) Industrial pallet racks,  10’ tall x 8’ wide x 42” deep.

Approx. (120) creosote cross tires, look new.

Shop and hand tools.

Aluminum and fiberglass step ladders.

Titan trash pump, new.

Titan pressure washer.

Hyd. cylinders.

Manual grease pump for 5gal. bucket.

Metal pipe hook (for handling pipe).


FIREARMS – SELL @ APPROX. 10:30 Not before – guns will not be on premises until sale day!   9:30 AM

Remington Woods Master Model 742, 280 cal. rifle, w/Weaver K4 scope.

Marlin Model 30AS, 30/30 cal. lever action rifle, micro-grooved barrel.

Remington Field Master Model 572, 22 cal. pump rifle, w/Weaver B4 scope.

Savage Model 30 Series E, 12 gauge pump shotgun, 3” chamber, never been fired.

Note: Firearms will sell @ approx. 10:30AM.  Bring a friend if you are planning to buy equipment and firearms & extra check if you are planning to buy equipment & firearms. Buyer will need proper ID.



JD 40 2-cyl. tractor.

Soilsaver, 6-shank, pull-type.


Auctioneer’s Note:  Jim Smith has been a shaker & doer all his career which started in 1958,  He managed the dairy in Butner for over 30 years, managed the dairy shows @ NC State Fair for decades, leader in the NC Cattlemen’s Association serving as President of the association & the foundation, is in the NC State Fair Livestock Hall of Fame.  This just skims the surface of some of the things he has done for agriculture not only here but everywhere.  Jim has decided to past the torch on to the next generation & invites everyone to come to his equipment dispersal.  He will enjoy seeing you & you will take home good equipment that has many hrs. of service left to give.


If you have further questions, call Jim between the hours of 9:00 am – 5:05 pm @ 919-218-8745 or Cindy Smith 919-819-8448.

(*) Indicates coming from others.

Terms & Conditions:  All purchases must be paid for sale day. All property sells as is where is with all faults, with absolutely no warranties implied or expressed in any way.  All Serial Numbers, mileage & hrs. unverified. All info printed in brochure is believed to be correct but not guaranteed.  The auction company reserves the right to offer property in separate sales, combinations thereof or as a whole.


Directions:  Being on I-85 north of Durham and south of Oxford, take exit 189 (Butner/Creedmoor Exit) to Hwy 56.  Turn West on Hwy 56, go ½ mile and turn right on 33rd street.  Travel 2 miles, turn right on Old 75 Hwy.  Travel 1.2 miles, sale site will be on right.  Watch for auction signs.
Sale site address:  3064 Old 75 Hwy – Stem, NC 27581

Click on any image to view larger.

Click on any image to view larger.

Click on any image to view larger.

Click on any image to view larger.

1219 hrs. on this Ford 6610 JD 2350 – faster turnaround @ the end of the field. Ready to haul massive loads ’90 model w/224K miles, clean.
Been across less then 600 acres Ford 3600 –  sells w/a loader bucket Mule – worth the wait. This baler has been used very little. Take a full push blade when –U- go- D65 Komatsu
This 325 will be on the job from dawn to done Vicon w/3 blades per disc Count on a good day w/JD 9-wheel rake Will not be @ sale site until morning of sale. If –U- ever run with a dolly, it’ll spoil you
Used 6 months w/late model up & down springs

Click on any image to view larger.

E. B. Harris Inc. Auctioneers


3200 NC Hwy. 58 WARRENTON, NC 27589

Your auction should be printing now. If not, please click here.